About Bledsoe Police Frequencies
Quick answer: County-level dispatch that covers Bledsoe: Cochran County Sheriff 155.1525 MHz, P25, no tone.
- 2 conventional channels use a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Cochran County channels that also cover Bledsoe
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Cochran County Sheriff | Cochran County Sheriff – Dispatch | 155.1525 In 159.0375 | P25 | WQDW492 | |
| Cochran County Sheriff | Cochran County Sheriff – Alternate | 155.6100 In 154.8900 | NAC 040 | P25 | KVV870 |
Nearest trunked radio sites
Distances are measured from the center of Bledsoe.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Bledsoe?
We do not have a dispatch channel listed specifically for Bledsoe. The county sheriff's dispatch channels in the same county: Cochran County Sheriff 155.1525 MHz, P25, no tone.
What scanner do I need to listen to police in Bledsoe?
A scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Bledsoe?
For Bledsoe, start with the Campus site of Texas Tech University. Its control channels are 858.4625, 858.9625, 859.4375, 859.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.