About Chambers County Fire and EMS Frequencies
Quick answer: Fire dispatch for Chambers County: Chambers County Fire 154.4150 MHz, FM, 156.7 PL. Trunked: Texas Wide Area Radio Network (TxWARN), for example Chambers County Fire talkgroup 2923 (hex b6b).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Chambers County, start with the Anahuac site of Texas Wide Area Radio Network (TxWARN). Its control channels: 772.44375, 772.70625 MHz.
Data updated .
Chambers County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chambers County Fire | Fire/EMS Response | 154.4150 In 153.7700 | 156.7 PL | FM | WNZC303 |
| Chambers County Fire | Fire/EMS Dispatch (dispatch only from trunked system talkgroup 46768) | 155.8050 In 154.9950 | 146.2 PL | FM | KWF869 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Chambers County Fire | Fire/EMS Tactical | 154.2650 | CSQ | FM | WNZC303 |
| Chambers County Fire | Fire/EMS Tactical | 154.4150 | 156.7 PL | FM | WNZC303 |
Chambers County trunked talkgroups
Texas Wide Area Radio Network (TxWARN)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Chambers County Fire | Fire/EMS Dispatch | 2923 | b6b | T |
| Chambers County Fire | Emergency Services (Fire/EMS Shared) | 2930 | b72 | T |
| Chambers County Fire | Emergency Services | 2931 | b73 | T |
| Chambers County Fire | Emergency Services | 2932 | b74 | T |
| Chambers County Fire | Emergency Services | 2933 | b75 | T |
| Chambers County Fire | Emergency Services | 2934 | b76 | T |
| Chambers County EMS | Chambers County EMS – Tactical Channel | 3000 | bb8 | T |
| Chambers County EMS | Chambers County EMS – Tactical Channel | 3002 | bba | T |
| Chambers County EMS | Chambers County EMS – Tactical Channel | 3004 | bbc | T |
Radio system sites in Chambers County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Chambers County
Common questions
What frequency does the fire department use in Chambers County?
Fire dispatch channels listed for Chambers County: Chambers County Fire 154.4150 MHz, FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Chambers County?
Yes. Fire and EMS talkgroups are listed for Texas Wide Area Radio Network (TxWARN): 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Chambers County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Chambers County?
For Chambers County, start with the Anahuac site of Texas Wide Area Radio Network (TxWARN). Its control channels are 772.44375, 772.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Chambers County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Chambers County are marked encrypted.
Are Chambers County fire and EMS talkgroups encrypted?
None of the 9 talkgroups listed for Chambers County are marked encrypted.