Skip to content

Baird Fire and EMS Frequencies

Baird in Callahan County, Texas has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is NW Erath County Simulcast (Granbury Regional Radio Network), about 69 miles away.

About Baird Fire and EMS Frequencies

Quick answer: Fire dispatch for Baird: Baird Fire 154.3550 MHz, narrow FM, 127.3 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Baird conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Baird
AgencyDescriptionFrequency (MHz)ToneModeFCC
Baird FireBaird Volunteer Fire Dispatch154.3550
In 156.0375
127.3 PLFMNWPAR859

Callahan County channels that also cover Baird

Fire Dispatch

Fire Dispatch frequencies for Callahan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Callahan County FireCottonwood Fire Dispatch154.1600FMNWNNC536
Callahan County FireEula Fire Dispatch155.3250
In 153.9500
156.7 PLFMNWPEW247
Callahan County FireFire/EMS Paging155.8200
In 153.9350
94.8 PLFMNWPJP333

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Callahan County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Callahan County FireOplin Fire154.2200CSQFMNWQGE325
Callahan County FirePutnam Volunteer Fire Department155.9850FMNWQJS590

Nearest trunked radio sites

Distances are measured from the center of Baird.

NW Erath County Simulcast · Granbury Regional Radio Network
RFSS 40 · Site 40 (hex 28) · NAC 028 · about 69 mi away
Control 769.58125, 772.68125, 773.43125, 774.23125
Stephenville · Granbury Regional Radio Network
RFSS 1 · Site 1 (hex 1) · NAC 001 · about 69 mi away
Control 770.28125, 771.70625, 772.93125, 773.93125
Cool VHF · North Texas Interoperable Radio Network (NTIRN)
RFSS 5 · Site 5 (hex 5) · NAC 444 · about 87 mi away
Control 152.81, 155.7225, 158.7825
Voice 152.585
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Baird?

Fire dispatch channels listed for Baird: Baird Fire 154.3550 MHz, narrow FM, 127.3 PL.

What scanner do I need to listen to fire and EMS in Baird?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Baird?

For Baird, start with the NW Erath County Simulcast site of Granbury Regional Radio Network. Its control channels are 769.58125, 772.68125, 773.43125, 774.23125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Baird fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Baird are marked encrypted.