Skip to content

Seadrift Fire and EMS Frequencies

We do not have frequencies listed specifically for Seadrift in Calhoun County, Texas yet. Countywide channels for Calhoun County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Victoria (Victoria County), about 29 miles away.

About Seadrift Fire and EMS Frequencies

Quick answer: County-level ems dispatch that covers Seadrift: Calhoun County EMS 155.0850 MHz, P25, no tone.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Calhoun County channels that also cover Seadrift

EMS Dispatch

EMS Dispatch frequencies for Calhoun County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calhoun County EMSCalhoun County EMS – Dispatch (PHI will use)155.0850
In 153.8150
P25KXF688

EMS Tactical

EMS Tactical frequencies for Calhoun County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calhoun County EMSEMS to Hospital463.1500
In 468.1500
FMNWQN858

EMS Talk-around

EMS Talk-around frequencies for Calhoun County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Calhoun County EMSEMS Talkaround153.815091.5 PLFMNKXF688

Nearest trunked radio sites

Distances are measured from the center of Seadrift.

Victoria · Victoria County
RFSS 7 · Site 1 (hex 1) · NAC 3A0 · about 29 mi away
Control 856.7375, 856.9875, 857.2625, 857.4625
Voice 856.4625, 856.7625, 856.9625, 857.7625, 857.9625, 857.9875, 858.2625
Rockport · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 2 · Site 51 (hex 33) · NAC 130 · about 36 mi away
Control 773.04375, 773.33125
Voice 770.70625, 774.54375
Palacios · Texas Wide Area Radio Network (TxWARN)
RFSS 1 · Site 2 (hex 2) · NAC 1A0 · about 37 mi away
Control 772.19375, 772.51875
Voice 769.59375, 770.11875, 771.84375, 772.01875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does EMS or the ambulance service use in Seadrift?

We do not have a EMS dispatch channel listed specifically for Seadrift. The county-level EMS dispatch channels in the same county: Calhoun County EMS 155.0850 MHz, P25, no tone.

What scanner do I need to listen to fire and EMS in Seadrift?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Seadrift?

For Seadrift, start with the Victoria site of Victoria County. Its control channels are 856.7375, 856.9875, 857.2625, 857.4625 MHz. Program a control channel first; the scanner finds the voice channels from it.