Skip to content

Brooks County Fire and EMS Frequencies

Brooks County in Texas has 2 countywide conventional frequencies and 17 countywide talkgroups in our database. Use the list of 6 cities and communities below for local fire departments and EMS agencies.

About Brooks County Fire and EMS Frequencies

Quick answer: Fire dispatch for Brooks County: Brooks County Fire 155.8650 MHz, narrow FM, 167.9 PL. Trunked: Coastal Bend Regional Interoperability Network, for example Brooks County Fire talkgroup 25081 (hex 61f9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Coastal Bend Regional Interoperability Network: 7 talkgroups; Lower Rio Grande Valley Regional Radio System (LRGVRRS): 10 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Brooks County, start with the Falfurrias site of Coastal Bend Regional Interoperability Network. Its control channels: 854.0375, 854.6625, 856.0625 MHz.
  • 1 listed entry is marked encrypted. No scanner can decode encrypted audio.

Data updated .

Brooks County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Brooks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brooks County FireFire and EMS Dispatch155.8650
In 158.9250
167.9 PLFMNWNML860

Hospitals & Medical

Hospitals & Medical frequencies for Brooks County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Brooks County HospitalBrooks County Hospital155.3400FMNKTV704

Brooks County trunked talkgroups

Coastal Bend Regional Interoperability Network

System ID 051

Coastal Bend Regional Interoperability Network talkgroups
AgencyDescriptionTalkgroupHexMode
Brooks County FireFire Page out2508161f9T
Brooks County FireBrooks County Fire – Fire Ground2507761f5T
ICS 11 FireICS 11 Fire Tactical21307533bT
Brooks County EMSBrooks County EMS – Dispatch2507861f6T
Halo Flight EMSHalo Flight EMS Dispatch2199055e6T
ICS 13 EMSICS 13 EMS Command21309533dT
1 encrypted talkgroup (cannot be monitored)
Coastal Bend Regional Interoperability Network encrypted talkgroups
AgencyDescriptionTalkgroupHexMode
ICS 9 FireICS 9 Fire Command213055339T Encrypted

Lower Rio Grande Valley Regional Radio System (LRGVRRS)

Lower Rio Grande Valley Regional Radio System (LRGVRRS) talkgroups
AgencyDescriptionTalkgroupHexMode
Hidalgo (Town)Hidalgo (Town) – Dispatch61411efe3D
Federal GovernmentUS Fish and Wildlife – Santa Ana Fire Operations63477f7f5D
Valley International Airport - HarlingenValley International Airport – Harlingen – Tactical Channel60660ecf4D
Med-Care Emergency Medical ServicesEMS Hidalgo County62971f5fbD
Med-Care Emergency Medical ServicesEMS Cameron County62972f5fcD
Scripture EMSScripture EMS – Dispatch63198f6deD
Med-Care Emergency Medical ServicesTalk Around62973f5fdD
Med-Care Emergency Medical ServicesTalk Around62974f5feD
Med-Care Emergency Medical ServicesAdministration62975f5ffD
RegionalRegional Med Com (Air Evac Lifeteam to ground EMS units)63165f6bdD

Radio system sites in Brooks County

Program the control channel first; your scanner finds the voice channels from it.

Falfurrias · Coastal Bend Regional Interoperability Network
RFSS 51 · Site 51 (hex 33) · NAC 3D
Control 854.0375, 854.6625, 856.0625, 857.2625
Encino · Coastal Bend Regional Interoperability Network
RFSS 53 · Site 53 (hex 35) · NAC 3F
Control 854.4125, 856.1125, 856.5875, 856.9375
Falfurias · Lower Rio Grande Valley Regional Radio System (LRGVRRS)
RFSS 1 · Site 12 (hex C)
Control 769.66875, 769.96875
Voice 769.21875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Brooks County

Common questions

What frequency does the fire department use in Brooks County?

Fire dispatch channels listed for Brooks County: Brooks County Fire 155.8650 MHz, narrow FM, 167.9 PL.

Do fire departments and EMS use a trunked radio system in Brooks County?

Yes. Fire and EMS talkgroups are listed for Coastal Bend Regional Interoperability Network: 7 talkgroups; Lower Rio Grande Valley Regional Radio System (LRGVRRS): 10 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Brooks County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Brooks County?

For Brooks County, start with the Falfurrias site of Coastal Bend Regional Interoperability Network. Its control channels are 854.0375, 854.6625, 856.0625, 857.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Brooks County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Brooks County are marked encrypted.

Are Brooks County fire and EMS talkgroups encrypted?

1 of the 17 talkgroups listed for Brooks County are marked fully or partly encrypted; a scanner cannot decode encrypted audio.