About Study Butte Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Study Butte: Brewster County Fire 154.3250 MHz, narrow FM, no tone. Trunked: Greater Austin/Travis Regional Radio System (GATRRS), for example Brewster County Hospital talkgroup 42741 (hex a6f5).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Study Butte, start with the Glass Mountain (Marathon) site of Greater Austin/Travis Regional Radio System (GATRRS), about 77 miles away. Its control channels: 155.1825, 155.3025 MHz.
Data updated .
Brewster County channels that also cover Study Butte
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brewster County Fire | Brewster County Fire – Dispatch | 154.3250 In 150.8050 | FMN | WNNI792 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Brewster County Fire | Brewster County Fire – Dispatch – North (Alpine) | 154.4000 In 159.0000 | 94.8 PL | FMN | WNNI792 |
Greater Austin/Travis Regional Radio System (GATRRS)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Brewster County Hospital | Big Bend Regional Hospital | 42741 | a6f5 | D |
Nearest trunked radio sites
Distances are measured from the center of Study Butte.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Study Butte?
We do not have a fire dispatch channel listed specifically for Study Butte. The county-level fire dispatch channels in the same county: Brewster County Fire 154.3250 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Study Butte?
Yes. The county-level systems that cover Study Butte are Fire and EMS talkgroups are listed for Greater Austin/Travis Regional Radio System (GATRRS): 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Study Butte?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Study Butte?
For Study Butte, start with the Glass Mountain (Marathon) site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 155.1825, 155.3025 MHz. Program a control channel first; the scanner finds the voice channels from it.