Skip to content

Andrews County Fire and EMS Frequencies

Andrews County in Texas has 2 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 4 cities and communities below for local fire departments and EMS agencies.

About Andrews County Fire and EMS Frequencies

Quick answer: Fire dispatch for Andrews County: Andrews County Fire 154.2350 MHz, P25, NAC 002.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.

Data updated .

Andrews County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Andrews County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Andrews County FireFire/EMS Primary154.2350
In 153.8300
NAC 002P25WPFJ927
Andrews County FireFire/EMS Primary154.2350
In 153.8300
88.5 PLFMNWPFJ927

Radio system sites in Andrews County

Program the control channel first; your scanner finds the voice channels from it.

Patricia · Greater Austin/Travis Regional Radio System (GATRRS)
RFSS 1 · Site 87 (hex 57) · NAC 130
Control 152.6225, 155.295
Voice 155.1675, 155.9475
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Andrews County

Common questions

What frequency does the fire department use in Andrews County?

Fire dispatch channels listed for Andrews County: Andrews County Fire 154.2350 MHz, P25, NAC 002.

What scanner do I need to listen to fire and EMS in Andrews County?

The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.

What are the control channels for trunked radio in Andrews County?

For Andrews County, start with the Patricia site of Greater Austin/Travis Regional Radio System (GATRRS). Its control channels are 152.6225, 155.295 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Andrews County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Andrews County are marked encrypted.