Skip to content

Java Fire and EMS Frequencies

We do not have frequencies listed specifically for Java in Walworth County, South Dakota yet. Countywide channels for Walworth County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Bowdle (South Dakota State Radio System), about 12 miles away.

About Java Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Java: Walworth County Fire 155.7600 MHz, FM, no tone. Trunked: South Dakota State Radio System, for example Walworth County Fire talkgroup 1214 (hex 4be).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Java, start with the Bowdle site of South Dakota State Radio System, about 12 miles away. Its control channels: 159.51, 159.87 MHz.

Data updated .

Walworth County channels that also cover Java

Fire Dispatch

Fire Dispatch frequencies for Walworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walworth County FireNorth Central155.7600
In 159.0675
FMWQHY393

Hospitals & Medical

Hospitals & Medical frequencies for Walworth County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Walworth County HospitalMobridge Regional Hospital155.2950FMNWPUI568

South Dakota State Radio System

South Dakota State Radio System talkgroups
AgencyDescriptionTalkgroupHexMode
Walworth County FireWalworth County Fire – Dispatch12144beD
Walworth County FireWalworth County Fire – Fire Ground12154bfD

Nearest trunked radio sites

Distances are measured from the center of Java.

Bowdle · South Dakota State Radio System
RFSS 1 · Site 7 (hex 7) · NAC 477 · about 12 mi away
Control 159.51, 159.87
Voice 156.225, 159.045
Lowry · South Dakota State Radio System
RFSS 1 · Site 27 (hex 1B) · about 16 mi away
Control 159, 159.33, 159.81
Voice 160.155
Herreid · South Dakota State Radio System
RFSS 1 · Site 51 (hex 33) · about 18 mi away
Control 157.98, 158.07
Voice 157.47, 157.8
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Java?

We do not have a fire dispatch channel listed specifically for Java. The county-level fire dispatch channels in the same county: Walworth County Fire 155.7600 MHz, FM, no tone.

Do fire departments and EMS use a trunked radio system in Java?

Yes. The county-level systems that cover Java are Fire and EMS talkgroups are listed for South Dakota State Radio System: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Java?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Java?

For Java, start with the Bowdle site of South Dakota State Radio System. Its control channels are 159.51, 159.87 MHz. Program a control channel first; the scanner finds the voice channels from it.