Skip to content

Harding County Fire and EMS Frequencies

Harding County in South Dakota has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 2 cities and communities below for local fire departments and EMS agencies.

About Harding County Fire and EMS Frequencies

Quick answer: Fire dispatch for Harding County: Harding County Fire 154.4000 MHz, FM, 141.3 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Harding County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Harding County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harding County FireHarding County Fire – Dispatch154.4000
In 153.9500
141.3 PLFMWNPF986

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Harding County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Harding County FireHarding County Fire – Tactical Channel154.0100CSQFMWNPF986
Harding County FireHarding County Fire – Tactical Channel154.1300CSQFMWNPF986

Radio system sites in Harding County

Program the control channel first; your scanner finds the voice channels from it.

Reva (Slim Buttes) · South Dakota State Radio System
RFSS 1 · Site 32 (hex 20)
Control 159.105, 159.315
Voice 159.69, 160.02
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Harding County

Common questions

What frequency does the fire department use in Harding County?

Fire dispatch channels listed for Harding County: Harding County Fire 154.4000 MHz, FM, 141.3 PL.

What scanner do I need to listen to fire and EMS in Harding County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Harding County?

For Harding County, start with the Reva (Slim Buttes) site of South Dakota State Radio System. Its control channels are 159.105, 159.315 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Harding County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Harding County are marked encrypted.