Skip to content

Fall River County Fire and EMS Frequencies

Fall River County in South Dakota has 3 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 11 cities and communities below for local fire departments and EMS agencies.

About Fall River County Fire and EMS Frequencies

Quick answer: Fire dispatch for Fall River County: Fall River County Fire 155.8200 MHz, narrow FM, 123.0 PL.

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Fall River County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Fall River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fall River County FireBall Hill Fire/EMS155.8200
In 153.7550
123.0 PLFMNWPKN894
Fall River County FireBattle Mountain Fire/EMS156.2100
In 153.9950
88.5 PLFMNWPKN894

EMS Talk-around

EMS Talk-around frequencies for Fall River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fall River County EMSBlack Hills Life-Flight123.0250AM—

Radio system sites in Fall River County

Program the control channel first; your scanner finds the voice channels from it.

Edgemont (Ball Hill) · South Dakota State Radio System
RFSS 1 · Site 22 (hex 16) · NAC 470
Control 157.3375, 159.12
Voice 159.42, 159.795
Hot Springs (Battle Mountain) · South Dakota State Radio System
RFSS 1 · Site 59 (hex 3B) · NAC 470
Control 155.5725, 158.895
Voice 159.165, 159.315
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Fall River County

Common questions

What frequency does the fire department use in Fall River County?

Fire dispatch channels listed for Fall River County: Fall River County Fire 155.8200 MHz, narrow FM, 123.0 PL.

What scanner do I need to listen to fire and EMS in Fall River County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Fall River County?

For Fall River County, start with the Edgemont (Ball Hill) site of South Dakota State Radio System. Its control channels are 157.3375, 159.12 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Fall River County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Fall River County are marked encrypted.