About Custer County Fire and EMS Frequencies
Quick answer: Fire dispatch for Custer County: Custer County Fire 158.9250 MHz, narrow FM, 203.5 PL. Trunked: South Dakota State Radio System, for example Custer County Fire talkgroup 785 (hex 311).
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Custer County, start with the Custer (Mt. Coolidge) site of South Dakota State Radio System. Its control channels: 155.895, 159.21 MHz.
Data updated .
Custer County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | Fire & EMS Dispatch Cicero Peak | 158.9250 In 153.7850 | 203.5 PL | FMN | WQHQ699 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County Fire | Search & Rescue | 155.2050 In 153.9200 | 156.7 PL | FMN | WPSR313 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Custer County EMS | Custer Co. Ambulance | 155.1750 | 131.8 PL | FMN | WRZ298 |
Custer County trunked talkgroups
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Custer County Fire | Southern Hills Fire | 785 | 311 | D |
| Custer County Fire | Custer County Fire – Fire Ground | 1289 | 509 | D |
| Custer County EMS | Custer County EMS – Tactical Channel | 922 | 39a | D |
| Custer County EMS | Custer County EMS – Tactical Channel | 1290 | 50a | D |
Radio system sites in Custer County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Custer County
Common questions
What frequency does the fire department use in Custer County?
Fire dispatch channels listed for Custer County: Custer County Fire 158.9250 MHz, narrow FM, 203.5 PL.
Do fire departments and EMS use a trunked radio system in Custer County?
Yes. Fire and EMS talkgroups are listed for South Dakota State Radio System: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Custer County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Custer County?
For Custer County, start with the Custer (Mt. Coolidge) site of South Dakota State Radio System. Its control channels are 155.895, 159.21 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Custer County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Custer County are marked encrypted.
Are Custer County fire and EMS talkgroups encrypted?
None of the 4 talkgroups listed for Custer County are marked encrypted.