About Huron Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Huron: Beadle County Fire 154.3850 MHz, FM, 146.2 PL. County-level ems dispatch that covers Huron: Beadle County EMS 155.3850 MHz, narrow FM, no tone. Trunked: South Dakota State Radio System, for example Huron Fire talkgroup 1406 (hex 57e).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: South Dakota State Radio System: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Huron, start with the Huron site of South Dakota State Radio System, about 1 miles away. Its control channels: 159.105, 159.3 MHz.
Data updated .
Huron trunked talkgroups
South Dakota State Radio System
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Huron Fire | Huron Fire | 1406 | 57e | D |
Beadle County channels that also cover Huron
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beadle County Fire | Hitchcock Fire | 154.3850 In 150.7750 | 146.2 PL | FM | WPGB231 |
| Beadle County Fire | Huron Fire | 154.4450 In 155.9850 | 173.8 PL | FM | KWF945 |
| Beadle County Fire | Cavour Fire | 155.0850 In 158.8800 | 136.5 PL | FM | WNUU200 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beadle County Fire | Wolsey Fire | 155.8350 In 158.9550 | 173.8 PL | FM | WNZS277 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Beadle County EMS | Huron Ambulance/EMS | 155.3850 | FMN | KEG207 |
Nearest trunked radio sites
Distances are measured from the center of Huron.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Huron?
We do not have a fire dispatch channel listed specifically for Huron. The county-level fire dispatch channels in the same county: Beadle County Fire 154.3850 MHz, FM, 146.2 PL.
What frequency does EMS or the ambulance service use in Huron?
We do not have a EMS dispatch channel listed specifically for Huron. The county-level EMS dispatch channels in the same county: Beadle County EMS 155.3850 MHz, narrow FM, no tone.
Do fire departments and EMS use a trunked radio system in Huron?
Yes. Fire and EMS talkgroups are listed for South Dakota State Radio System: 1 talkgroup. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Huron?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Huron?
For Huron, start with the Huron site of South Dakota State Radio System. Its control channels are 159.105, 159.3 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Huron fire and EMS talkgroups encrypted?
None of the 1 talkgroups listed for Huron are marked encrypted.