About Wamic Police Frequencies
Quick answer: County-level dispatch that covers Wamic: Wasco County Sheriff 154.8300 MHz, narrow FM, 192.8 PL. Trunked: Oregon State Radio Project, for example Wasco County Sheriff talkgroup 33100 (hex 814c).
- 5 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Oregon State Radio Project: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Wamic, start with the Foreman Point site of Oregon State Radio Project, about 11 miles away. Its control channels: 769.96875, 770.69375, 771.19375 MHz.
Data updated .
Wasco County channels that also cover Wamic
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| The Dalles, City of Police | The Dalles, City of Police – Dispatch | 155.0100 | 192.8 PL | FMN | WPXQ477 |
| Wasco County Sheriff | Wasco County Sheriff – Dispatch | 154.8300 | 192.8 PL | FMN | KNAU346 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| The Dalles, City of Police | The Dalles, City of Police – Tactical Channel | 453.3500 In 458.3500 | FMN | WPXQ477 | |
| Wasco County Sheriff | Law Enforcement | 155.6100 | FMN | KNAU346 | |
| Wasco County Sheriff | Wasco County Sheriff – Tactical Channel | 453.4875 In 458.4875 | FMN | KNAU346 |
Oregon State Radio Project
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wasco County Sheriff | Wasco County Sheriff – Dispatch | 33100 | 814c | T |
| Wasco County Sheriff | Wasco County Sheriff – Dispatch | 40931 | 9fe3 | T |
| Wasco County Sheriff | Wasco County Sheriff – Dispatch | 40932 | 9fe4 | T |
| Wasco County Sheriff | Wasco County Sheriff – Dispatch | 40933 | 9fe5 | T |
Nearest trunked radio sites
Distances are measured from the center of Wamic.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Wamic?
We do not have a dispatch channel listed specifically for Wamic. The county sheriff's dispatch channels in the same county: Wasco County Sheriff 154.8300 MHz, narrow FM, 192.8 PL.
Do the police use a trunked radio system in Wamic?
Yes. The county-level systems that cover Wamic are Law-enforcement talkgroups are listed for Oregon State Radio Project: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Wamic?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Wamic?
For Wamic, start with the Foreman Point site of Oregon State Radio Project. Its control channels are 769.96875, 770.69375, 771.19375, 771.90625 MHz. Program a control channel first; the scanner finds the voice channels from it.