Skip to content

Biggs Junction Fire and EMS Frequencies

We do not have frequencies listed specifically for Biggs Junction in Sherman County, Oregon yet. Countywide channels for Sherman County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Juniper Pt (Oregon State Radio Project), about 7 miles away.

About Biggs Junction Fire and EMS Frequencies

Quick answer: Trunked: Oregon State Radio Project, for example Sherman County Fire talkgroup 28200 (hex 6e28).

  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Biggs Junction, start with the Juniper Pt site of Oregon State Radio Project, about 7 miles away. Its control channels: 769.68125, 770.91875, 773.30625 MHz.

Data updated .

Sherman County channels that also cover Biggs Junction

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Sherman County FireSherman County Fire282006e28T
Sherman County EMSSherman County EMS282046e2cT

Nearest trunked radio sites

Distances are measured from the center of Biggs Junction.

Juniper Pt · Oregon State Radio Project
RFSS 19 · Site 19 (hex 13) · NAC 013 · about 7 mi away
Control 769.68125, 770.91875, 773.30625, 773.79375, 774.31875
The Dalles Simulcast · Oregon State Radio Project
RFSS 80 · Site 80 (hex 50) · NAC 050 · about 15 mi away
Control 769.21875, 770.44375, 771.18125, 773.03125, 773.56875, 774.29375, 774.83125
Goodnoe Hill · Oregon State Radio Project
RFSS 33 · Site 33 (hex 21) · NAC 020 · about 15 mi away
Control 769.45625, 770.96875, 774.80625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

Do fire departments and EMS use a trunked radio system in Biggs Junction?

Yes. The county-level systems that cover Biggs Junction are Fire and EMS talkgroups are listed for Oregon State Radio Project: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Biggs Junction?

A trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Biggs Junction?

For Biggs Junction, start with the Juniper Pt site of Oregon State Radio Project. Its control channels are 769.68125, 770.91875, 773.30625, 773.79375 MHz. Program a control channel first; the scanner finds the voice channels from it.