Skip to content

Lacomb Fire and EMS Frequencies

We do not have frequencies listed specifically for Lacomb in Linn County, Oregon yet. Countywide channels for Linn County that may also cover this area are shown below when we have them. The closest trunked radio site we have is McCully Mtn (Oregon State Radio Project), about 14 miles away.

About Lacomb Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Lacomb: Linn County Fire 155.8500 MHz, narrow FM, 77.0 PL.

  • 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Linn County channels that also cover Lacomb

Fire Dispatch

Fire Dispatch frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Dispatch155.8500
In 151.1000
77.0 PLFMNWSAR749

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County FireLinn County Fire – Working154.1300
In 158.9100
156.7 PLFMNWSAR749
Linn County FireLinn County Fire – Tactical Channel – Simplex155.5650
In 155.5650
167.9 PLFMNWNNH454
Linn County FireLinn County Fire – Working156.1875
In 154.3100
100.0 PLFMNWRZV756
Linn County FireLinn County Fire – Working159.1425
In 153.9950
123.0 PLFMNWRZV756

Hospitals & Medical

Hospitals & Medical frequencies for Linn County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Linn County HospitalAlbany General Hospital155.3400173.8 PLFMN—
Linn County HospitalLebanon Community Hospital155.3400131.8 PLFMN—

Nearest trunked radio sites

Distances are measured from the center of Lacomb.

McCully Mtn · Oregon State Radio Project
RFSS 7 · Site 7 (hex 7) · NAC 007 · about 14 mi away
Control 769.19375, 770.19375, 774.03125, 774.54375, 774.81875
Scott Mtn Lookout · Oregon State Radio Project
RFSS 16 · Site 16 (hex 10) · NAC 010 · about 14 mi away
Control 769.16875, 769.70625, 770.68125, 773.54375, 773.84375, 774.30625
Scott Mountain · SW 7 County Interoperable Public Safety Radio Partnership
RFSS 1 · Site 11 (hex B) · NAC 1FB · about 14 mi away
Control 769.25625, 769.55625, 770.00625
Voice 770.25625, 771.05625, 771.30625, 772.25625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Lacomb?

We do not have a fire dispatch channel listed specifically for Lacomb. The county-level fire dispatch channels in the same county: Linn County Fire 155.8500 MHz, narrow FM, 77.0 PL.

What scanner do I need to listen to fire and EMS in Lacomb?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lacomb?

For Lacomb, start with the McCully Mtn site of Oregon State Radio Project. Its control channels are 769.19375, 770.19375, 774.03125, 774.54375 MHz. Program a control channel first; the scanner finds the voice channels from it.