Skip to content

Lake County Fire and EMS Frequencies

Lake County in Oregon has 6 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 13 cities and communities below for local fire departments and EMS agencies.

About Lake County Fire and EMS Frequencies

Quick answer: Fire dispatch for Lake County: Lake County Fire 154.4300 MHz, narrow FM, 186.2 PL. EMS dispatch for Lake County: Lake County EMS 158.9700 MHz, narrow FM, 156.7 PL.

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Lake County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FireThomas Creek/Westside Fire Department Repeater154.4300
In 153.7700
186.2 PLFMNWNXF571
Lake County FireLake County Fire – Dispatch155.9550156.7 PLFMNWPME967

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County FirePortable to Portable153.8300CSQFMNWPCF478
Lake County FireSilver Lake Rural Fire Tactical154.3250CSQFMNWPCF478
Lake County FireSilver Lake Rural Fire Tactical154.3850CSQFMNWPCF478

EMS Dispatch

EMS Dispatch frequencies for Lake County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Lake County EMSPaisley Disaster Unit/Christmas Valley EMS158.9700156.7 PLFMNWPME967

Radio system sites in Lake County

Program the control channel first; your scanner finds the voice channels from it.

Glass Butte · Oregon State Radio Project
RFSS 15 · Site 15 (hex F) · NAC 00F
Control 769.21875, 774.08125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Lake County

Common questions

What frequency does the fire department use in Lake County?

Fire dispatch channels listed for Lake County: Lake County Fire 154.4300 MHz, narrow FM, 186.2 PL.

What frequency does EMS or the ambulance service use in Lake County?

EMS dispatch channels listed for Lake County: Lake County EMS 158.9700 MHz, narrow FM, 156.7 PL.

What scanner do I need to listen to fire and EMS in Lake County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Lake County?

For Lake County, start with the Glass Butte site of Oregon State Radio Project. Its control channels are 769.21875, 774.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Lake County fire and EMS frequencies encrypted?

None of the 6 conventional frequencies listed for Lake County are marked encrypted.