Skip to content

Cascade Locks Fire and EMS Frequencies

We do not have frequencies listed specifically for Cascade Locks in Hood River County, Oregon yet. Countywide channels for Hood River County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Skamania Mountain (Oregon State Radio Project), about 10 miles away.

About Cascade Locks Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Cascade Locks: Hood River County Fire 154.3700 MHz, narrow FM, no tone. Trunked: Oregon State Radio Project, for example Hood River County Fire talkgroup 40940 (hex 9fec).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 1 talkgroup. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Cascade Locks, start with the Skamania Mountain site of Oregon State Radio Project, about 10 miles away. Its control channels: 769.70625, 770.21875, 770.68125 MHz.

Data updated .

Hood River County channels that also cover Cascade Locks

Fire Dispatch

Fire Dispatch frequencies for Hood River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River County FireHood River County Fire – Tactical Channel / Cascade Locks Dispatch154.3700FMNWPNT452
Hood River County FireHood River County Fire – Dispatch158.8050114.8 PLFMNWPMG928

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Hood River County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Hood River County FireHood River County Fire – Tactical Channel153.9500FMNWPMG928
Hood River County FireHood River County Fire – Tactical Channel154.1750FMNWPNT452
Hood River County FireHood River County Fire – Tactical Channel154.2350114.8 PLFMNWPMG928
Hood River County FireHood River County Fire – Tactical Channel154.2650FMNWPMG928

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Hood River County FireCounty Fire Dispatch409409fecT

Nearest trunked radio sites

Distances are measured from the center of Cascade Locks.

Skamania Mountain · Oregon State Radio Project
RFSS 36 · Site 36 (hex 24) · NAC 024 · about 10 mi away
Control 769.70625, 770.21875, 770.68125, 774.30625, 774.80625
Hood River Simulcast · Oregon State Radio Project
RFSS 70 · Site 70 (hex 46) · NAC 046 · about 17 mi away
Control 769.46875, 770.43125, 771.29375, 773.58125, 774.58125
Headworks · Portland
RFSS 1 · Site 27 (hex 1B) · NAC 3C0 · about 21 mi away
Control 852.2875, 853.825
Voice 851.3375, 851.375, 851.725, 857.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Cascade Locks?

We do not have a fire dispatch channel listed specifically for Cascade Locks. The county-level fire dispatch channels in the same county: Hood River County Fire 154.3700 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Cascade Locks?

Yes. The county-level systems that cover Cascade Locks are Fire and EMS talkgroups are listed for Oregon State Radio Project: 1 talkgroup. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Cascade Locks?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Cascade Locks?

For Cascade Locks, start with the Skamania Mountain site of Oregon State Radio Project. Its control channels are 769.70625, 770.21875, 770.68125, 774.30625 MHz. Program a control channel first; the scanner finds the voice channels from it.