About Diamond Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Diamond: County Fire Agencies 154.3025 MHz, narrow FM, 97.4 PL.
- 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Harney County channels that also cover Diamond
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Agencies | County Fire Agencies – Dispatch – King Mtn | 154.3025 | 97.4 PL | FMN | — |
| County Fire Agencies | Countywide Fire Dispatch | 154.3100 | FMN | — | |
| County Fire Agencies | County Fire Agencies – Dispatch – Steens Mtn | 154.3775 | 97.4 PL | FMN | — |
| County Fire Agencies | County Fire Agencies – Dispatch – Glass Butte | 154.4075 | 97.4 PL | FMN | — |
| County Fire Agencies | Burns Fire Dispatch | 154.7100 | 107.2 PL | FMN | WQF595 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Agencies | County Fire Agencies – Tactical Channel | 154.1300 | FMN | WPFX642 | |
| County Fire Agencies | County Fire Agencies – Tactical Channel | 158.9850 | FMN | WPEV302 | |
| County Law Enforcement | Oregon State Search and Rescue | 155.8050 | FMN | — |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospital Emergency Administration Radio | Harney County District Hospital | 155.2200 | FMN | WNHE979 |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hospital Emergency Administration Radio | State HEAR Ambulance Radio System | 155.3400 | FMN | WNHE979 |
Nearest trunked radio sites
Distances are measured from the center of Diamond.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Diamond?
We do not have a fire dispatch channel listed specifically for Diamond. The county-level fire dispatch channels in the same county: County Fire Agencies 154.3025 MHz, narrow FM, 97.4 PL.
What scanner do I need to listen to fire and EMS in Diamond?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Diamond?
For Diamond, start with the Glass Butte site of Oregon State Radio Project. Its control channels are 769.21875, 774.08125 MHz. Program a control channel first; the scanner finds the voice channels from it.