About Lonerock Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lonerock: County Fire Agencies 159.0900 MHz, narrow FM, no tone. County-level ems dispatch that covers Lonerock: County Fire Agencies 154.0475 MHz, narrow FM, 565 DPL.
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Gilliam County channels that also cover Lonerock
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Agencies | County Fire Agencies – Dispatch (Countywide) | 159.0900 | FMN | WNRV488 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Agencies | ODF Red Net | 151.3400 | FMN | — | |
| County Fire Agencies | State Fire Net | 154.2800 | FMN | — | |
| County Fire Agencies | North Gilliam County Tactical | 154.3250 | 146.2 PL | FMN | WNXN713 |
| County Fire Agencies | South Gilliam County Tactical | 154.8450 | 162.2 PL | FMN | KWM920 |
| County Law Enforcement | Oregon State Search and Rescue | 155.8050 | FMN | — |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| County Fire Agencies | North Gilliam Dlsp. Rptr "921" | 154.0475 | 565 DPL | FMN | — |
| County Fire Agencies | South Gilliam Dispatch Rptr "920" | 155.1825 | 565 DPL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Lonerock.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lonerock?
We do not have a fire dispatch channel listed specifically for Lonerock. The county-level fire dispatch channels in the same county: County Fire Agencies 159.0900 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Lonerock?
We do not have a EMS dispatch channel listed specifically for Lonerock. The county-level EMS dispatch channels in the same county: County Fire Agencies 154.0475 MHz, narrow FM, 565 DPL.
What scanner do I need to listen to fire and EMS in Lonerock?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lonerock?
For Lonerock, start with the Heppner site of Umatilla Morrow Radio and Data District. Its control channels are 770.11875, 771.71875, 772.71875 MHz. Program a control channel first; the scanner finds the voice channels from it.