About Melrose Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Melrose: Douglas County Fire 154.3700 MHz, narrow FM, 151.4 PL. County-level ems dispatch that covers Melrose: Douglas County EMS 151.5050 MHz, narrow FM, 051 DPL.
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Douglas County channels that also cover Melrose
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Dispatch | 154.3700 In 159.0000 | 151.4 PL | FMN | KOI622 |
| Douglas County Fire | Dispatch Relay (North County) | 460.5375 In 465.5375 | FMN | WNFA748 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Tactical Channel – South County | 153.7700 | CSQ | FMN | KNCR637 |
| Douglas County Fire | Glide Fire | 154.1900 | FMN | — | |
| Douglas County Fire | Douglas County Fire – Tactical Channel – North County | 154.2500 | 151.4 PL | FMN | KNCR637 |
| Douglas County Fire | Douglas County Fire – Tactical Channel – Central County | 154.6500 | 151.4 PL | FMN | KNBD705 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Fire | Douglas County Fire – Alternate | 154.4450 In 158.8800 | 151.4 PL | FMN | KNCR637 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County EMS | REACH Air Medical Services | 151.5050 | 051 DPL | FMN | — |
| Douglas County EMS | Bay Cities Ambulance – Boomer Hill | 152.2775 | 125 DPL | FMN | — |
| Douglas County EMS | Bay Cities Ambulance – Mt Nebo | 153.1100 | 125 DPL | FMN | — |
| Douglas County EMS | Bay Cities Ambulance – Scott Mtn | 153.3500 | 125 DPL | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Douglas County Hospital | EMS to Hospital | 155.3400 | FMN | WNLZ346 |
Nearest trunked radio sites
Distances are measured from the center of Melrose.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Melrose?
We do not have a fire dispatch channel listed specifically for Melrose. The county-level fire dispatch channels in the same county: Douglas County Fire 154.3700 MHz, narrow FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Melrose?
We do not have a EMS dispatch channel listed specifically for Melrose. The county-level EMS dispatch channels in the same county: Douglas County EMS 151.5050 MHz, narrow FM, 051 DPL.
What scanner do I need to listen to fire and EMS in Melrose?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Melrose?
For Melrose, start with the Bear Mountain site of SW 7 County Interoperable Public Safety Radio Partnership. Its control channels are 453.125, 453.2875, 453.4125 MHz. Program a control channel first; the scanner finds the voice channels from it.