Skip to content

Crook County Fire and EMS Frequencies

Crook County in Oregon has 2 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 12 cities and communities below for local fire departments and EMS agencies.

About Crook County Fire and EMS Frequencies

Quick answer: Fire dispatch for Crook County: Crook County Fire 154.9650 MHz, narrow FM, 131.8 PL. Trunked: Oregon State Radio Project, for example Crook County Fire talkgroup 9129 (hex 23a9).

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oregon State Radio Project: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Crook County, start with the Grizzly site of Oregon State Radio Project. Its control channels: 769.41875, 770.45625, 770.70625 MHz.

Data updated .

Crook County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Crook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crook County FireFire/EMS Dispatch154.9650
In 155.5950
131.8 PLFMNKCK677

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Crook County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Crook County FireCrook County Fire – Tactical Channel154.2350FMNWQEB632

Crook County trunked talkgroups

Oregon State Radio Project

Oregon State Radio Project talkgroups
AgencyDescriptionTalkgroupHexMode
Crook County FireCrook Co Fire912923a9T
Crook County HospitalSt. Charles Hospital Prineville9071236fT

Radio system sites in Crook County

Program the control channel first; your scanner finds the voice channels from it.

Grizzly · Oregon State Radio Project
RFSS 17 · Site 17 (hex 11) · NAC 011
Control 769.41875, 770.45625, 770.70625, 773.31875, 774.05625
Powell Butte · Oregon State Radio Project
RFSS 24 · Site 24 (hex 18) · NAC 018
Control 769.45625, 769.71875, 770.21875, 770.94375, 774.79375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Crook County

Common questions

What frequency does the fire department use in Crook County?

Fire dispatch channels listed for Crook County: Crook County Fire 154.9650 MHz, narrow FM, 131.8 PL.

Do fire departments and EMS use a trunked radio system in Crook County?

Yes. Fire and EMS talkgroups are listed for Oregon State Radio Project: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Crook County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Crook County?

For Crook County, start with the Grizzly site of Oregon State Radio Project. Its control channels are 769.41875, 770.45625, 770.70625, 773.31875 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Crook County fire and EMS frequencies encrypted?

None of the 2 conventional frequencies listed for Crook County are marked encrypted.

Are Crook County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Crook County are marked encrypted.