About Okay Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Okay: Rural Fire Districts 151.2275 MHz, narrow FM, 162 DPL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Wagoner County Fire talkgroup 1809 (hex 711).
- 9 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Okay, start with the Muskogee County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25), about 11 miles away. Its control channels: 852.225, 852.4 MHz.
Data updated .
Wagoner County channels that also cover Okay
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire Districts | Rolling Hills Fire Tone Out | 151.2275 In 153.8750 | 162 DPL | FMN | WQWM406 |
| Rural Fire Districts | Toppers Fire Tone Out | 154.1450 | FM | WPTJ994 | |
| Rural Fire Districts | Whitehorn Cove Fire Tone Out | 154.3700 In 151.2200 | FMN | WQSH487 | |
| Rural Fire Districts | Okay Fire Tone Out | 154.3850 | FMN | WPYC505 | |
| Rural Fire Districts | Flat Rock Fire Tone Out | 154.4450 In 159.1800 | FMN | WQXC418 | |
| Rural Fire Districts | Oak Grove Fire Tone Out | 154.7400 In 158.8350 | 171.3 PL | FMN | WPPB523 |
| Rural Fire Districts | Taylors Ferry Fire (Southeast of Wagoner) | 154.8750 In 159.0750 | 100.0 PL | FMN | WPGR779 |
| Rural Fire Districts | Stone Bluff Fire Tone Out | 155.6925 In 158.8725 | FMN | WQQQ612 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire Districts | Oak Grove Fire 800 Tone Out | 854.9625 | 143 DPL | FMN | WPIZ622 |
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Wagoner County Fire | Oak Grove Fire | 1809 | 711 | D |
| Wagoner County Fire | County Fire Dispatch | 1841 | 731 | D |
Nearest trunked radio sites
Distances are measured from the center of Okay.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Okay?
We do not have a fire dispatch channel listed specifically for Okay. The county-level fire dispatch channels in the same county: Rural Fire Districts 151.2275 MHz, narrow FM, 162 DPL.
Do fire departments and EMS use a trunked radio system in Okay?
Yes. The county-level systems that cover Okay are Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Okay?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Okay?
For Okay, start with the Muskogee County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.225, 852.4 MHz. Program a control channel first; the scanner finds the voice channels from it.