About Tulsa County Fire and EMS Frequencies
Quick answer: Fire dispatch for Tulsa County: Rural Fire Districts 154.2800 MHz, narrow FM, CSQ. EMS dispatch for Tulsa County: Air Evac Life Team 159.5025 MHz, narrow FM, 032 DPL; Mercy Regional EMS 452.3875 MHz, DMR, CC 8 · TG 1 · SL 1. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Tulsa County Rural Fire talkgroup 651 (hex 28b).
- 12 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Tulsa County, start with the Tulsa simulcast site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 856.1125, 857.9375 MHz.
Data updated .
Tulsa County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Rural Fire Districts | Turley Fire Dispatch (Page Out) | 154.2800 | CSQ | FMN | WXY398 |
| Rural Fire Districts | Liberty Fire | 154.3100 In 158.9850 | DMR | WRJK666 | |
| Rural Fire Districts | Keystone Fire Patched to OKWIN | 155.2950 In 153.8300 | 205 DPL | FMN | KSJ286 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Life Team | Air Evac -- Tulsa Tower | 159.5025 | 032 DPL | FMN | WPYQ819 |
| Mercy Regional EMS | Mercy Regional EMS – Dispatch | 452.3875 In 457.3875 | CC 8 · TG 1 · SL 1 | DMR | WRBT480 |
| Tulsa Life Flight EMS | Medical Helicopters | 462.9500 In 467.9500 | 162.2 PL | FMN | WZY371 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMSA EMS | EMSA | 463.0000 In 468.0000 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.0250 In 468.0250 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.0500 In 468.0500 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.0750 In 468.0750 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA (Dispatch before OKWIN) | 463.1000 In 468.1000 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.1250 In 468.1250 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.1500 In 468.1500 | 162.2 PL | FMN | WYZ245 |
| EMSA EMS | EMSA | 463.1750 In 468.1750 | 162.2 PL | FMN | WYZ245 |
Tulsa County trunked talkgroups
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Tulsa County Rural Fire | Green Country Fire Dispatch | 651 | 28b | D |
| Tulsa County Rural Fire | Keystone Fire Dispatch | 3621 | e25 | D |
Radio system sites in Tulsa County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Tulsa County
Common questions
What frequency does the fire department use in Tulsa County?
Fire dispatch channels listed for Tulsa County: Rural Fire Districts 154.2800 MHz, narrow FM, CSQ.
What frequency does EMS or the ambulance service use in Tulsa County?
EMS dispatch channels listed for Tulsa County: Air Evac Life Team 159.5025 MHz, narrow FM, 032 DPL; Mercy Regional EMS 452.3875 MHz, DMR, CC 8 · TG 1 · SL 1; Tulsa Life Flight EMS 462.9500 MHz, narrow FM, 162.2 PL.
Do fire departments and EMS use a trunked radio system in Tulsa County?
Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Tulsa County?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Tulsa County?
For Tulsa County, start with the Tulsa simulcast site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 856.1125, 857.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Tulsa County fire and EMS frequencies encrypted?
None of the 14 conventional frequencies listed for Tulsa County are marked encrypted.
Are Tulsa County fire and EMS talkgroups encrypted?
None of the 2 talkgroups listed for Tulsa County are marked encrypted.