About Hooker Fire and EMS Frequencies
Quick answer: Fire dispatch for Hooker: Hooker Fire 155.0250 MHz, narrow FM, 114.8 PL.
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Hooker conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Hooker Fire | Hooker Fire – Dispatch | 155.0250 In 155.7450 | 114.8 PL | FMN | WNFG211 |
Texas County channels that also cover Hooker
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Texas County Fire | County Fire – Tyrone | 154.9800 In 155.8350 | 110.9 PL | FMN | WQRS272 |
| Texas County Fire | County Fire – Hooker | 154.9800 In 155.8350 | 136.5 PL | FMN | WQRS272 |
| Texas County Fire | County Fire – Guymon | 154.9800 In 155.8350 | 118.8 PL | FMN | WQRS272 |
Nearest trunked radio sites
Distances are measured from the center of Hooker.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Hooker?
Fire dispatch channels listed for Hooker: Hooker Fire 155.0250 MHz, narrow FM, 114.8 PL.
What scanner do I need to listen to fire and EMS in Hooker?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Hooker?
For Hooker, start with the Elk City site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 856.2125, 857.2125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Hooker fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Hooker are marked encrypted.