About Long Police Frequencies
Quick answer: County-level dispatch that covers Long: Sequoyah County Sheriff 158.8500 MHz, DMR, CC 11 · TG 20000 · SL 1.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Sequoyah County channels that also cover Long
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Sequoyah County Sheriff | Sequoyah County Sheriff – Dispatch | 158.8500 In 153.7550 | CC 11 · TG 20000 · SL 1 | DMR | WPGJ219 |
| Sequoyah County Sheriff | Dispatch Analog | 158.8500 In 153.7550 | 114.8 PL | FMN | WPGJ219 |
Nearest trunked radio sites
Distances are measured from the center of Long.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Long?
We do not have a dispatch channel listed specifically for Long. The county sheriff's dispatch channels in the same county: Sequoyah County Sheriff 158.8500 MHz, DMR, CC 11 · TG 20000 · SL 1.
What scanner do I need to listen to police in Long?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Long?
For Long, start with the Cookson site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 853.0375, 853.9 MHz. Program a control channel first; the scanner finds the voice channels from it.