About Lima Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lima: Seminole County Fire 152.4050 MHz, FM, 151.4 PL. County-level ems dispatch that covers Lima: Air Evac Medical Helicopters 151.5050 MHz, narrow FM, 103.5 PL.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Seminole County channels that also cover Lima
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Seminole County Fire | County Fire Net | 152.4050 | 151.4 PL | FM | WPWA595 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopters | Air Evac – Seminole Base | 151.5050 | 103.5 PL | FMN | — |
Nearest trunked radio sites
Distances are measured from the center of Lima.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lima?
We do not have a fire dispatch channel listed specifically for Lima. The county-level fire dispatch channels in the same county: Seminole County Fire 152.4050 MHz, FM, 151.4 PL.
What frequency does EMS or the ambulance service use in Lima?
We do not have a EMS dispatch channel listed specifically for Lima. The county-level EMS dispatch channels in the same county: Air Evac Medical Helicopters 151.5050 MHz, narrow FM, 103.5 PL.
What scanner do I need to listen to fire and EMS in Lima?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Lima?
For Lima, start with the Tecumseh site of Oklahoma Multi-Agency Communications System (OMACS). Its control channels are 772.38125, 772.68125 MHz. Program a control channel first; the scanner finds the voice channels from it.