About Clayton Fire and EMS Frequencies
Quick answer: Fire dispatch for Clayton: Clayton Fire 155.0325 MHz, narrow FM, no tone.
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Clayton conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clayton Fire | Police, Fire and EMS Dispatch | 155.0325 | FMN | KNIH927 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Clayton Fire | Police, Fire and EMS Secondary | 153.9425 | FMN | KNIH927 |
Nearest trunked radio sites
Distances are measured from the center of Clayton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Clayton?
Fire dispatch channels listed for Clayton: Clayton Fire 155.0325 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Clayton?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Clayton?
For Clayton, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Clayton fire and EMS frequencies encrypted?
None of the 2 conventional frequencies listed for Clayton are marked encrypted.