About Muskogee County Fire and EMS Frequencies
Quick answer: Fire dispatch for Muskogee County: Gooseneck Bend Rural Fire District 155.8650 MHz, narrow FM, no tone; Muskogee County Fire 154.2350 MHz, narrow FM, no tone. EMS dispatch for Muskogee County: Muskogee County EMS 155.3850 MHz, narrow FM, 186.2 PL. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Muskogee County Fire talkgroup 3953 (hex f71).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Muskogee County, start with the Muskogee County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 852.225, 852.4 MHz.
Data updated .
Muskogee County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Gooseneck Bend Rural Fire District | Gooseneck Bend Rural Fire District – Dispatch | 155.8650 In 150.8050 | FMN | WQFB904 | |
| Muskogee County Fire | Muskogee County Fire – Dispatch (Dispatch before OKWIN) | 154.2350 | FMN | WPBG525 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muskogee County EMS | Muskogee County EMS – Dispatch (Dispatch before OKWIN) | 155.3850 | 186.2 PL | FMN | KNDN777 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muskogee County EMS | Car to Car | 462.7625 | FMN | — |
Hospitals & Medical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Muskogee Regional Medical Center | Hospital | 155.2200 | FMN | KGP636 | |
| Muskogee Regional Medical Center | Hospital Security | 461.1750 In 466.1750 | FMN | WNFE882 | |
| Muskogee Regional Medical Center | Hospital Staff Operations | 464.3750 In 469.3750 | FMN | WNFE882 |
Muskogee County trunked talkgroups
Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Muskogee County Fire | Muskogee County Fire – Dispatch | 3953 | f71 | D |
| Muskogee County EMS | Muskogee County EMS – Dispatch | 1911 | 777 | D |
| Muskogee County Hospital | St Francis-Muskogee Hospital ER | 1185 | 4a1 | D |
Radio system sites in Muskogee County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Muskogee County
Common questions
What frequency does the fire department use in Muskogee County?
Fire dispatch channels listed for Muskogee County: Gooseneck Bend Rural Fire District 155.8650 MHz, narrow FM, no tone; Muskogee County Fire 154.2350 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Muskogee County?
EMS dispatch channels listed for Muskogee County: Muskogee County EMS 155.3850 MHz, narrow FM, 186.2 PL.
Do fire departments and EMS use a trunked radio system in Muskogee County?
Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Muskogee County?
The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.
What are the control channels for trunked radio in Muskogee County?
For Muskogee County, start with the Muskogee County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.225, 852.4 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Muskogee County fire and EMS frequencies encrypted?
None of the 7 conventional frequencies listed for Muskogee County are marked encrypted.
Are Muskogee County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Muskogee County are marked encrypted.