Davis also extends into Garvin County.
About Davis Fire and EMS Frequencies
Quick answer: Fire dispatch for Davis: Davis Fire 152.8100 MHz, DMR, CC 7 · TG 1906 · SL 2. County-level ems dispatch that covers Davis: Murray County EMS 155.2050 MHz, narrow FM, 723 DPL.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Davis conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Davis Fire | Davis Fire – Dispatch | 152.8100 | CC 7 · TG 1906 · SL 2 | DMR | — |
Murray County channels that also cover Davis
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Murray County EMS | Murray County EMS – Dispatch | 155.2050 In 159.0150 | 723 DPL | FMN | WPYU550 |
Nearest trunked radio sites
Distances are measured from the center of Davis.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Davis?
Fire dispatch channels listed for Davis: Davis Fire 152.8100 MHz, DMR, CC 7 · TG 1906 · SL 2.
What frequency does EMS or the ambulance service use in Davis?
We do not have a EMS dispatch channel listed specifically for Davis. The county-level EMS dispatch channels in the same county: Murray County EMS 155.2050 MHz, narrow FM, 723 DPL.
What scanner do I need to listen to fire and EMS in Davis?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Davis?
For Davis, start with the Arbuckle Mountain site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.4875, 860.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Davis fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Davis are marked encrypted.