About Checotah Fire and EMS Frequencies
Quick answer: Fire dispatch for Checotah: Checotah Fire 154.4300 MHz, DMR, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (DMR), which needs a scanner that decodes that mode.
Data updated .
Checotah conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Checotah Fire | Checotah Fire – Dispatch | 154.4300 In 153.8300 | DMR | WQIE260 |
McIntosh County channels that also cover Checotah
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| McIntosh County Fire | Fire -- South | 158.8650 In 155.0850 | 203.5 PL | FMN | KLA639 |
| McIntosh County Fire | Fire -- North | 159.3300 In 155.9025 | 203.5 PL | FMN | WQPE375 |
| Vivian Fire | Vivian Fire – Dispatch | 155.8050 | FM | — |
Nearest trunked radio sites
Distances are measured from the center of Checotah.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Checotah?
Fire dispatch channels listed for Checotah: Checotah Fire 154.4300 MHz, DMR, no tone.
What scanner do I need to listen to fire and EMS in Checotah?
The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels.
What are the control channels for trunked radio in Checotah?
For Checotah, start with the Muskogee County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.225, 852.4 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Checotah fire and EMS frequencies encrypted?
None of the 1 conventional frequencies listed for Checotah are marked encrypted.