Skip to content

Ames Fire and EMS Frequencies

We do not have frequencies listed specifically for Ames in Major County, Oklahoma yet. Countywide channels for Major County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Enid (Enid), about 19 miles away.

About Ames Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Ames: Major County Fire 154.4150 MHz, NXDN48, no tone.

  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Major County channels that also cover Ames

Fire Dispatch

Fire Dispatch frequencies for Major County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Major County FireFire and EMS Dispatch154.4150
In 154.0700
NXDN48WQOP864

Nearest trunked radio sites

Distances are measured from the center of Ames.

Enid · Enid
Site 1 (hex 1) · about 19 mi away
Control 154.0625
Voice 154.0325, 154.7475, 154.7625, 154.9725
Geary · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 9 (hex 9) · NAC 92C · about 49 mi away
Control 859.4875, 860.4875
Voice 856.4875, 857.4875, 858.4875
Guthrie · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 11 (hex B) · NAC 92C · about 50 mi away
Control 859.2375, 860.2375
Voice 853.2375, 856.2375, 857.2375, 858.2375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Ames?

We do not have a fire dispatch channel listed specifically for Ames. The county-level fire dispatch channels in the same county: Major County Fire 154.4150 MHz, NXDN48, no tone.

What scanner do I need to listen to fire and EMS in Ames?

A scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Ames?

For Ames, start with the Enid site of Enid. Its control channels are 154.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.