Skip to content

Red Oak Fire and EMS Frequencies

We do not have frequencies listed specifically for Red Oak in Latimer County, Oklahoma yet. Countywide channels for Latimer County that may also cover this area are shown below when we have them. The closest trunked radio site we have is Gore (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 44 miles away.

About Red Oak Fire and EMS Frequencies

Quick answer: County-level fire dispatch that covers Red Oak: Latimer County Fire 155.1600 MHz, FM, 114.8 PL. County-level ems dispatch that covers Red Oak: Latimer County EMS 155.2800 MHz, narrow FM, 723 DPL.

  • 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Latimer County channels that also cover Red Oak

Fire Dispatch

Fire Dispatch frequencies for Latimer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Latimer County FireLatimer County Fire – Dispatch155.1600
In 159.0450
114.8 PLFMWPXD689

EMS Dispatch

EMS Dispatch frequencies for Latimer County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Latimer County EMSPafford EMS Dispatch155.2800723 DPLFMNWQQB528

Nearest trunked radio sites

Distances are measured from the center of Red Oak.

Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E · about 44 mi away
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
Cookson · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 47 (hex 2F) · NAC 92D · about 52 mi away
Control 853.0375, 853.9
Voice 851.0875, 852.275, 852.55, 852.725, 852.875
Muskogee County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 53 (hex 35) · NAC 92D · about 53 mi away
Control 852.225, 852.4
Voice 851.15, 851.45, 853.225, 853.5875, 853.8375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Red Oak?

We do not have a fire dispatch channel listed specifically for Red Oak. The county-level fire dispatch channels in the same county: Latimer County Fire 155.1600 MHz, FM, 114.8 PL.

What frequency does EMS or the ambulance service use in Red Oak?

We do not have a EMS dispatch channel listed specifically for Red Oak. The county-level EMS dispatch channels in the same county: Latimer County EMS 155.2800 MHz, narrow FM, 723 DPL.

What scanner do I need to listen to fire and EMS in Red Oak?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Red Oak?

For Red Oak, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.