Skip to content

Johnston County Fire and EMS Frequencies

Johnston County in Oklahoma has 1 countywide conventional frequency and 0 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Johnston County Fire and EMS Frequencies

Quick answer: Fire dispatch for Johnston County: Johnston County Fire 154.1900 MHz, narrow FM, 192.8 PL.

  • 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.

Data updated .

Johnston County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Johnston County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Johnston County FireFire, EMS and Emergency Management154.1900
In 155.8650
192.8 PLFMNWPAG264

Radio system sites in Johnston County

Program the control channel first; your scanner finds the voice channels from it.

Tishomingo · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 35 (hex 23) · NAC 92B
Control 859.9375, 860.9375
Voice 856.9375, 857.9375, 858.9375
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Johnston County

Common questions

What frequency does the fire department use in Johnston County?

Fire dispatch channels listed for Johnston County: Johnston County Fire 154.1900 MHz, narrow FM, 192.8 PL.

What scanner do I need to listen to fire and EMS in Johnston County?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Johnston County?

For Johnston County, start with the Tishomingo site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9375, 860.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Johnston County fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Johnston County are marked encrypted.