Skip to content

Stigler Fire and EMS Frequencies

Stigler in Haskell County, Oklahoma has 1 conventional frequency and 0 trunked talkgroups listed for local fire and EMS agencies. The closest trunked radio site we have is Gore (Oklahoma Wireless Interoperability Network (OKWIN) (P25)), about 23 miles away.

About Stigler Fire and EMS Frequencies

Quick answer: Fire dispatch for Stigler: Stigler Fire 154.7100 MHz, FM, no tone. County-level ems dispatch that covers Stigler: Haskell County EMS 155.0250 MHz, narrow FM, 186.2 PL.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.

Data updated .

Stigler conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Stigler
AgencyDescriptionFrequency (MHz)ToneModeFCC
Stigler FireStigler Fire – Dispatch154.7100FM—

Haskell County channels that also cover Stigler

Fire Dispatch

Fire Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County FireHaskell County Fire – Dispatch – North151.0025
In 155.8275
025 DPLFMNWPKG690
Haskell County FireHaskell County Fire – Dispatch – South151.0850
In 153.9500
127.3 PLFMNWPKG690

EMS Dispatch

EMS Dispatch frequencies for Haskell County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Haskell County EMSHaskell County EMS – Dispatch155.0250
In 151.3925
186.2 PLFMNWRZC685

Nearest trunked radio sites

Distances are measured from the center of Stigler.

Gore · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 52 (hex 34) · NAC 92E · about 23 mi away
Control 859.2625, 860.2625
Voice 855.9625, 856.2625, 857.2625, 858.2625
Muskogee County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 53 (hex 35) · NAC 92D · about 32 mi away
Control 852.225, 852.4
Voice 851.15, 851.45, 853.225, 853.5875, 853.8375
Cookson · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 47 (hex 2F) · NAC 92D · about 33 mi away
Control 853.0375, 853.9
Voice 851.0875, 852.275, 852.55, 852.725, 852.875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Common questions

What frequency does the fire department use in Stigler?

Fire dispatch channels listed for Stigler: Stigler Fire 154.7100 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Stigler?

We do not have a EMS dispatch channel listed specifically for Stigler. The county-level EMS dispatch channels in the same county: Haskell County EMS 155.0250 MHz, narrow FM, 186.2 PL.

What scanner do I need to listen to fire and EMS in Stigler?

The analog conventional channels can be heard on any scanner.

What are the control channels for trunked radio in Stigler?

For Stigler, start with the Gore site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.2625, 860.2625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Stigler fire and EMS frequencies encrypted?

None of the 1 conventional frequencies listed for Stigler are marked encrypted.