Skip to content

Delaware County Fire and EMS Frequencies

Delaware County in Oklahoma has 11 countywide conventional frequencies and 3 countywide talkgroups in our database. Use the list of 34 cities and communities below for local fire departments and EMS agencies.

About Delaware County Fire and EMS Frequencies

Quick answer: Fire dispatch for Delaware County: Delaware County Fire 154.3400 MHz, narrow FM, no tone; Rural Fire Districts 154.0100 MHz, narrow FM, 445 DPL. Trunked: Delaware County Public Service DMR (DMR), for example Delaware County Fire talkgroup 2153 (hex 869).

  • 6 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 5 conventional channels use a digital mode (DMR), which needs a scanner that decodes that mode.
  • Trunked radio systems that carry fire and EMS traffic here: Delaware County Public Service DMR (DMR): 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Delaware County, start with the Jay site of Delaware County Public Service DMR. Its control channels: 453.425 MHz.

Data updated .

Delaware County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Delaware County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Delaware County FireDelaware County Fire – Dispatch154.3400FMNWPAC911
Rural Fire DistrictsLeach Fire154.0100
In 150.7750
445 DPLFMNWPMJ486
Rural Fire DistrictsCleora Fire154.1300186.2 PLFMNKNHK436
Rural Fire DistrictsFlint Ridge Fire -- Near Kansas159.1050
In 153.7700
FMNWPEV913
Rural Fire DistrictsCowskin Fire/EMS -- North of Grove453.3125
In 458.3125
CC 15 · TG 1 · SL 1DMRWRAD226
Rural Fire DistrictsZena Fire -- North of Jay453.4375
In 458.4375
CC 15 · TG * · SL 1DMRWPMW898
Rural Fire DistrictsBernice Fire Department453.5250
In 458.5250
CC 15 · TG * · SL 2DMRWQYI833
Rural Fire DistrictsHickory Grove Fire453.5375
In 458.5375
CC 15 · TG 1 · SL 1DMRWPMM298
Rural Fire DistrictsMonkey Island Fire -- on Grand Lake453.6875
In 458.6875
CC 3 · TG 1 · SL 1DMRWPMM985
Rural Fire DistrictsButler Fire -- Near Jay453.7875
In 458.7875
516 DPLFMNWPZQ732
Rural Fire DistrictsParadise Point Fire -- North of Grove460.6375
In 465.6375
743 DPLFMNWPXR991

Delaware County trunked talkgroups

Delaware County Public Service DMR

DMR

Delaware County Public Service DMR talkgroups
AgencyDescriptionTalkgroupHexMode
Delaware County FireFire TG 21532153869T
Delaware County EMSEMS TG 21202120848T
Delaware County EMSEMS TG 21212121849T

Radio system sites in Delaware County

Program the control channel first; your scanner finds the voice channels from it.

Jay · Delaware County Public Service DMR
DMR · Site 1 (hex 1)
Control 453.425
Voice 453.675
Kansas · Delaware County Public Service DMR
DMR · Site 2 (hex 2)
Control 460.275
Voice 460.5875
Grove · Delaware County Public Service DMR
DMR · Site 3 (hex 3)
Control 453.275
Voice 453.3625, 453.5875, 453.725
Locust Grove · Delaware County Public Service DMR
DMR · Site 4 (hex 4)
Control 453.125
Voice 453.9
West Siloam Springs · Delaware County Public Service DMR
DMR · Site 5 (hex 5)
Voice 460.0375
Jay · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 16 (hex 10) · NAC 92D
Control 859.2125, 860.2125
Voice 855.2125, 856.2125, 857.2125, 858.2125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Delaware County

Common questions

What frequency does the fire department use in Delaware County?

Fire dispatch channels listed for Delaware County: Delaware County Fire 154.3400 MHz, narrow FM, no tone; Rural Fire Districts 154.0100 MHz, narrow FM, 445 DPL.

Do fire departments and EMS use a trunked radio system in Delaware County?

Yes. Fire and EMS talkgroups are listed for Delaware County Public Service DMR (DMR): 3 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Delaware County?

The analog conventional channels can be heard on any scanner; a scanner that decodes DMR is needed for the digital conventional channels; a trunking scanner that supports DMR is needed for the trunked talkgroups.

What are the control channels for trunked radio in Delaware County?

For Delaware County, start with the Jay site of Delaware County Public Service DMR. Its control channels are 453.425 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Delaware County fire and EMS frequencies encrypted?

None of the 11 conventional frequencies listed for Delaware County are marked encrypted.

Are Delaware County fire and EMS talkgroups encrypted?

None of the 3 talkgroups listed for Delaware County are marked encrypted.