Skip to content

Creek County Fire and EMS Frequencies

Creek County in Oklahoma has 4 countywide conventional frequencies and 8 countywide talkgroups in our database. Use the list of 20 cities and communities below for local fire departments and EMS agencies.

About Creek County Fire and EMS Frequencies

Quick answer: Fire dispatch for Creek County: Rural Fire Districts 152.2850 MHz, narrow FM, no tone. Trunked: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25), for example Creek County Fire talkgroup 3095 (hex c17).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Creek County, start with the Creek County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels: 852.5375, 852.7875, 853.4875 MHz.

Data updated .

Creek County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Creek County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural Fire DistrictsSlick Fire152.2850
In 157.5450
FMNWQDB738
Rural Fire DistrictsOlive Fire – Area Fire Page Out152.9150
In 159.9900
371 DPLFMNWQIW905
Rural Fire DistrictsBasin Fire (near Mannford)154.2650123.0 PLFMNWPHX216

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Creek County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural Fire DistrictsFreedom Hill Fire Backup155.7600FMNWQRG602

Creek County trunked talkgroups

Oklahoma Wireless Interoperability Network (OKWIN) (P25)

Project 25

Oklahoma Wireless Interoperability Network (OKWIN) (P25) talkgroups
AgencyDescriptionTalkgroupHexMode
Creek County FireFreedom Hill Fire Dispatch3095c17D
Creek County FireCreek County Fire – Fire Ground1569621D
Creek County FireCreek County Fire – Fire Ground17216b9D
Creek County FireCreek County Fire – Fire Ground3465d89D
Creek County FireCreek County Fire – Fire Ground3467d8bD
Creek County FireCreek County Fire – Fire Ground3991f97D
Creek County EMSCreek County EMS – Dispatch3385d39D
Creek County EMSEMS B Tactical9853d9D

Radio system sites in Creek County

Program the control channel first; your scanner finds the voice channels from it.

Creek County · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 60 (hex 3C) · NAC 92E
Control 852.5375, 852.7875, 853.4875, 853.9625
Voice 851.075, 851.275, 851.7, 851.8875, 852.15, 852.3
Drumright · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 66 (hex 42)
Control 852.775
Voice 851.225, 851.75, 853.6875
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Creek County

Common questions

What frequency does the fire department use in Creek County?

Fire dispatch channels listed for Creek County: Rural Fire Districts 152.2850 MHz, narrow FM, no tone.

Do fire departments and EMS use a trunked radio system in Creek County?

Yes. Fire and EMS talkgroups are listed for Oklahoma Wireless Interoperability Network (OKWIN) (P25) (Project 25): 8 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Creek County?

The analog conventional channels can be heard on any scanner; a trunking scanner that supports Project 25 is needed for the trunked talkgroups.

What are the control channels for trunked radio in Creek County?

For Creek County, start with the Creek County site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 852.5375, 852.7875, 853.4875, 853.9625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Creek County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Creek County are marked encrypted.

Are Creek County fire and EMS talkgroups encrypted?

None of the 8 talkgroups listed for Creek County are marked encrypted.