About Bromide Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Bromide: Coal County Fire 154.0400 MHz, P25, NAC 300.
- 1 conventional channel is analog FM, so any scanner can receive it. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Coal County channels that also cover Bromide
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Coal County Fire | Sheriff Fire and EMS Dispatch | 154.0400 In 155.7300 | NAC 300 | P25 | KAZ888 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Coal County Fire | Tactical and Mutual Aid | 154.4150 In 150.8050 | 97.4 PL | FMN | WQFU637 |
Nearest trunked radio sites
Distances are measured from the center of Bromide.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Bromide?
We do not have a fire dispatch channel listed specifically for Bromide. The county-level fire dispatch channels in the same county: Coal County Fire 154.0400 MHz, P25, NAC 300.
What scanner do I need to listen to fire and EMS in Bromide?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
What are the control channels for trunked radio in Bromide?
For Bromide, start with the Tishomingo site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.9375, 860.9375 MHz. Program a control channel first; the scanner finds the voice channels from it.