About Canadian County Fire and EMS Frequencies
Quick answer: Fire dispatch for Canadian County: Richland Fire 154.0400 MHz, narrow FM, 167.9 PL. EMS dispatch for Canadian County: Canadian County EMS 153.6350 MHz, narrow FM, 712 DPL.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
Data updated .
Canadian County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Richland Fire | Richland Fire – Dispatch | 154.0400 In 159.4050 | 167.9 PL | FMN | WNWD405 |
| Richland Fire | Richland Fire | 154.2500 | 218.1 PL | FMN | WNWD405 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Canadian County EMS | Pafford EMS Concho Dispatch | 153.6350 In 158.3325 | 712 DPL | FMN | WRDC920 |
Radio system sites in Canadian County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Canadian County
Common questions
What frequency does the fire department use in Canadian County?
Fire dispatch channels listed for Canadian County: Richland Fire 154.0400 MHz, narrow FM, 167.9 PL.
What frequency does EMS or the ambulance service use in Canadian County?
EMS dispatch channels listed for Canadian County: Canadian County EMS 153.6350 MHz, narrow FM, 712 DPL.
What scanner do I need to listen to fire and EMS in Canadian County?
The analog conventional channels can be heard on any scanner.
What are the control channels for trunked radio in Canadian County?
For Canadian County, start with the Geary site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 859.4875, 860.4875 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Canadian County fire and EMS frequencies encrypted?
None of the 3 conventional frequencies listed for Canadian County are marked encrypted.