About Bryan County Fire and EMS Frequencies
Quick answer: Fire dispatch for Bryan County: Bryan County Fire 151.2725 MHz, P25, NAC 122. EMS dispatch for Bryan County: Air Evac Medical Helicopter 151.5050 MHz, narrow FM, no tone.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 1 conventional channel uses a digital mode (P25), which needs a scanner that decodes that mode.
Data updated .
Bryan County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Bryan County Fire | Main Fire Dispatch | 151.2725 In 156.0475 | NAC 122 | P25 | WQVF211 |
| Bryan County Fire | West Bryan County Fire – East side of Lake Texoma | 154.2200 | FMN | WPDP820 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Air Evac Medical Helicopter | Durant Tower | 151.5050 In 158.4000 | FMN | — | |
| Air Evac Medical Helicopter | Air Evac – Sherman, TX Base | 152.4275 In 157.6875 | 162.2 PL | FMN | WRDH998 |
Radio system sites in Bryan County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Bryan County
Common questions
What frequency does the fire department use in Bryan County?
Fire dispatch channels listed for Bryan County: Bryan County Fire 151.2725 MHz, P25, NAC 122.
What frequency does EMS or the ambulance service use in Bryan County?
EMS dispatch channels listed for Bryan County: Air Evac Medical Helicopter 151.5050 MHz, narrow FM, no tone.
What scanner do I need to listen to fire and EMS in Bryan County?
The analog conventional channels can be heard on any scanner; a scanner that decodes P25 is needed for the digital conventional channels.
Are Bryan County fire and EMS frequencies encrypted?
None of the 4 conventional frequencies listed for Bryan County are marked encrypted.