About Lambert Fire and EMS Frequencies
Quick answer: County-level fire dispatch that covers Lambert: Alfalfa County Fire 154.4300 MHz, narrow FM, 91.5 PL; Great Salt Plains State Park 154.2500 MHz, narrow FM, no tone. County-level ems dispatch that covers Lambert: Alfalfa County EMS 154.3250 MHz, NXDN48, RAN 11.
- 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- 2 conventional channels use a digital mode (NXDN48), which needs a scanner that decodes that mode.
Data updated .
Alfalfa County channels that also cover Lambert
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alfalfa County Fire | Fire Tone Out | 154.4300 In 159.0900 | 91.5 PL | FMN | WQDG481 |
| Alfalfa County Fire | Alfalfa County Fire – Dispatch | 154.4300 In 159.0900 | RAN 11 | NXDN48 | WQDG481 |
| Great Salt Plains State Park | Nescatunga Fire Dispatch -- Great Salt Lake Area | 154.2500 | FMN | WPFG745 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alfalfa County Fire | Tri County Fire and Emergency Management (Alfalfa, Garfield and Grant Counties) -- Called Tri-County A | 154.2650 In 153.8300 | 192.8 PL | FMN | WPKF871 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Alfalfa County EMS | Alfalfa County EMS – Dispatch | 154.3250 In 159.3525 | RAN 11 | NXDN48 | WQPV249 |
Nearest trunked radio sites
Distances are measured from the center of Lambert.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency does the fire department use in Lambert?
We do not have a fire dispatch channel listed specifically for Lambert. The county-level fire dispatch channels in the same county: Alfalfa County Fire 154.4300 MHz, narrow FM, 91.5 PL; Great Salt Plains State Park 154.2500 MHz, narrow FM, no tone.
What frequency does EMS or the ambulance service use in Lambert?
We do not have a EMS dispatch channel listed specifically for Lambert. The county-level EMS dispatch channels in the same county: Alfalfa County EMS 154.3250 MHz, NXDN48, RAN 11.
What scanner do I need to listen to fire and EMS in Lambert?
The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.
What are the control channels for trunked radio in Lambert?
For Lambert, start with the Enid site of Enid. Its control channels are 154.0625 MHz. Program a control channel first; the scanner finds the voice channels from it.