Skip to content

Adair County Fire and EMS Frequencies

Adair County in Oklahoma has 5 countywide conventional frequencies and 0 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Adair County Fire and EMS Frequencies

Quick answer: Fire dispatch for Adair County: Rural Fire Departments 154.1450 MHz, narrow FM, no tone. EMS dispatch for Adair County: Adair County EMS 155.8800 MHz, NXDN48, no tone.

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • 1 conventional channel uses a digital mode (NXDN48), which needs a scanner that decodes that mode.

Data updated .

Adair County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Adair County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Rural Fire DepartmentsHighway 100 West Fire -- near Bunch154.1450FMNWNXM321
Rural Fire DepartmentsHighway 51 Rural Fire -- Near Stilwell154.2950FMNWPKB301
Rural Fire DepartmentsTri Community Fire -- Southeast of Stilwell154.4450FMNWNJG985
Rural Fire DepartmentsMid County Fire158.7825
In 155.9325
FMNWQPZ858

EMS Dispatch

EMS Dispatch frequencies for Adair County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Adair County EMSPafford EMS Dispatch155.8800
In 158.9175
NXDN48WNYJ859

Radio system sites in Adair County

Program the control channel first; your scanner finds the voice channels from it.

Watts · Oklahoma Wireless Interoperability Network (OKWIN) (P25)
Project 25 · RFSS 1 · Site 48 (hex 30) · NAC 92D
Control 858.4125, 860.3125
Voice 854.8125, 855.1125, 855.5375, 855.7875, 856.8625, 857.4125
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Adair County

Common questions

What frequency does the fire department use in Adair County?

Fire dispatch channels listed for Adair County: Rural Fire Departments 154.1450 MHz, narrow FM, no tone.

What frequency does EMS or the ambulance service use in Adair County?

EMS dispatch channels listed for Adair County: Adair County EMS 155.8800 MHz, NXDN48, no tone.

What scanner do I need to listen to fire and EMS in Adair County?

The analog conventional channels can be heard on any scanner; a scanner that decodes NXDN48 is needed for the digital conventional channels.

What are the control channels for trunked radio in Adair County?

For Adair County, start with the Watts site of Oklahoma Wireless Interoperability Network (OKWIN) (P25). Its control channels are 858.4125, 860.3125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Adair County fire and EMS frequencies encrypted?

None of the 5 conventional frequencies listed for Adair County are marked encrypted.