About Vinton County Fire and EMS Frequencies
Quick answer: Fire dispatch for Vinton County: Vinton County Fire Dispatch 460.3500 MHz, narrow FM, 156.7 PL. EMS dispatch for Vinton County: EMS Agencies 460.3500 MHz, narrow FM, 156.7 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Vinton County Fire talkgroup 48005 (hex bb85).
- 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Vinton County, start with the Allensville (Vinton) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 774.33125, 774.58125 MHz.
Data updated .
Vinton County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vinton County Fire Dispatch | Vinton County Fire Dispatch | 460.3500 In 465.3500 | 156.7 PL | FMN | WPMD723 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vinton County Fire | Vinton County EMA | 155.8050 | CSQ | FMN | WPTV442 |
| Vinton County Fire | Vinton County EMA | 453.1875 In 458.1875 | 114.8 PL | FMN | WPTV442 |
| Vinton County Fire | Vinton County EMA | 453.7125 | FMN | WPTV442 |
Fire Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Vinton County EMS/Fire alternate | Vinton County EMS/Fire alternate | 463.7500 In 468.7500 | 123.0 PL | FMN | WQEN314 |
EMS Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Vinton County EMS Alerting | 460.3500 In 465.3500 | 156.7 PL | FMN | WPMD723 |
EMS Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | EMS mobile extenders | 453.1875 | CSQ | FMN | WPTV442 |
EMS Talk-around
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| EMS Agencies | Vinton County EMS alternate | 462.9750 In 467.9750 | 152 DPL | FMN | WPKR706 |
Vinton County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Vinton County Fire | Vinton County Fire – Dispatch | 48005 | bb85 | D |
| Vinton County Fire | County Fire paging | 48027 | bb9b | D |
| Vinton County EMS | Vinton County EMS – Dispatch | 48002 | bb82 | D |
Radio system sites in Vinton County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Vinton County
Common questions
What frequency does the fire department use in Vinton County?
Fire dispatch channels listed for Vinton County: Vinton County Fire Dispatch 460.3500 MHz, narrow FM, 156.7 PL.
What frequency does EMS or the ambulance service use in Vinton County?
EMS dispatch channels listed for Vinton County: EMS Agencies 460.3500 MHz, narrow FM, 156.7 PL.
Do fire departments and EMS use a trunked radio system in Vinton County?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Vinton County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Vinton County?
For Vinton County, start with the Allensville (Vinton) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.33125, 774.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Vinton County fire and EMS frequencies encrypted?
None of the 8 conventional frequencies listed for Vinton County are marked encrypted.
Are Vinton County fire and EMS talkgroups encrypted?
None of the 3 talkgroups listed for Vinton County are marked encrypted.