Skip to content

Putnam County Fire and EMS Frequencies

Putnam County in Ohio has 8 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 30 cities and communities below for local fire departments and EMS agencies.

About Putnam County Fire and EMS Frequencies

Quick answer: Fire dispatch for Putnam County: County Fire - Dispatch 154.2500 MHz, narrow FM, 136.5 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Putnam County Fire talkgroup 41506 (hex a222).

  • 8 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Putnam County, start with the BGSU (Deshler) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 770.90625, 772.85625 MHz.

Data updated .

Putnam County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - DispatchCounty Fire – Dispatch154.2500
In 150.7750
136.5 PLFMNKNEP953

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Putnam County
AgencyDescriptionFrequency (MHz)ToneModeFCC
County Fire - FiregroundCounty Fire – Fireground159.1800
In 153.8000
703 DPLFMNKNEP953
County Fire - Fireground DirectCounty Fire – Fireground Direct153.8000CSQFMNKNEP953
County Fire - TacticalCounty Fire – Tactical154.2650CSQFMN—
County Fire - TacticalCounty Fire – Tactical154.2800CSQFMN—
County Fire - TacticalCounty Fire – Tactical154.2950CSQFMN—
County Fire - TacticalCounty Fire – Tactical155.2800
In 154.2800
CSQFMN—
County Fire - TacticalCounty Fire – Tactical155.8050CSQFMN—

Putnam County trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Putnam County FirePutnam County Fire – Dispatch41506a222D
Putnam County FireFire/EMS Paging41520a230D
Putnam County FireFire Operations41502a21eD
Putnam County FireFire Operations41510a226D
Putnam County FireFire Operations41512a228D
Putnam County EMSPutnam County EMS – Dispatch41504a220D

Radio system sites in Putnam County

Program the control channel first; your scanner finds the voice channels from it.

BGSU (Deshler) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 36 (hex 24) · NAC 343
Control 770.90625, 772.85625
Voice 769.20625, 769.58125, 770.00625, 852.05, 852.7875, 853.175
Continental · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 37 (hex 25) · NAC 344
Control 773.08125, 773.90625
Voice 770.40625, 772.75625, 851.6125, 858.5125
Ottawa · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 38 (hex 26) · NAC 345
Control 771.53125, 772.25625
Voice 769.68125, 771.13125, 852.175
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Putnam County

Common questions

What frequency does the fire department use in Putnam County?

Fire dispatch channels listed for Putnam County: County Fire - Dispatch 154.2500 MHz, narrow FM, 136.5 PL.

Do fire departments and EMS use a trunked radio system in Putnam County?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Putnam County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Putnam County?

For Putnam County, start with the BGSU (Deshler) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 770.90625, 772.85625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Putnam County fire and EMS frequencies encrypted?

None of the 8 conventional frequencies listed for Putnam County are marked encrypted.

Are Putnam County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Putnam County are marked encrypted.