About Pike County Police Frequencies
Quick answer: Dispatch for Pike County: Pike County Sheriff 151.1600 MHz, FM, 67.0 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Pike County Sheriff talkgroup 54842 (hex d63a).
- 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Pike County, start with the Elm Grove (Rarden) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 772.80625, 773.45625 MHz.
Data updated .
Pike County conventional frequencies
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Sheriff | Pike County Sheriff's Office dispatch | 151.1600 In 155.9475 | 67.0 PL | FM | WQBT852 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Pike County Sheriff | Pike County Sheriff's Office dispatch | 39.5800 | 77.0 PL | FM | KCJ827 |
| Pike County Sheriff | Pike County Sheriff's Office dispatch (not used) | 39.7200 | FM | KCJ827 | |
| Pike County Sheriff | Pike County Sheriff's Office (repeats 39.58) | 155.8950 | CSQ | FM | WPNP404 |
Pike County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Pike County Sheriff | Pike County Sheriff – Dispatch | 54842 | d63a | D |
| Pike County State Corrections | Adult Parole Authority – Chillicothe Unit | 52833 | ce61 | D |
Radio system sites in Pike County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Pike County
Common questions
What frequency do the police use in Pike County?
Dispatch channels listed for Pike County: Pike County Sheriff 151.1600 MHz, FM, 67.0 PL.
What is the sheriff's dispatch frequency in Pike County?
Pike County Sheriff 151.1600 MHz, FM, 67.0 PL.
Do the police use a trunked radio system in Pike County?
Yes. Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Pike County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Pike County?
For Pike County, start with the Elm Grove (Rarden) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.80625, 773.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Pike County police frequencies encrypted?
None of the 4 conventional frequencies listed for Pike County are marked encrypted.
Are Pike County police talkgroups encrypted?
None of the 2 talkgroups listed for Pike County are marked encrypted.