About Reading Police Frequencies
Quick answer: County-level dispatch that covers Reading: Perry Co Sheriff 460.1750 MHz, FM, 723 DPL; Perry Co Sheriff dispatch 39.9200 MHz, FM, 82.5 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Perry County Sheriff talkgroup 39001 (hex 9859).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Reading, start with the New Lexington site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 7 miles away. Its control channels: 771.75625, 774.70625 MHz.
Data updated .
Perry County channels that also cover Reading
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry Co Sheriff | Perry Co Sheriff (repeats 39.92) | 460.1750 In 465.1750 | 723 DPL | FM | WPKU577 |
| Perry Co Sheriff dispatch | Perry Co Sheriff dispatch | 39.9200 | 82.5 PL | FM | KQE296 |
Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry Co Sheriff | Perry Co Sheriff | 39.4600 | 82.5 PL | FM | KQE296 |
| Perry Co Sheriff | Perry Co Sheriff | 465.4500 | FM | WPKU577 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Perry Co Sheriff | Perry Co Sheriff (old F1, half-duplex) | 39.6400 In 39.3000 | 82.5 PL | FM | KQE296 |
| Perry Co Sheriff | Perry Co Sheriff | 155.9100 | FM | KQE296 | |
| Perry Co Sheriff | Perry Co Sheriff | 155.9700 | FM | KQE296 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Perry County Sheriff | New Lexington Metroplex" Police" | 39001 | 9859 | D |
| Perry County Sheriff | Perry County Sheriff – Dispatch | 54856 | d648 | D |
| Perry County Sheriff | Perry County Sheriff – Tactical Channel | 54841 | d639 | D |
| Perry County State Corrections | Adult Parole Authority – Hocking Unit | 52828 | ce5c | D |
Nearest trunked radio sites
Distances are measured from the center of Reading.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Reading?
We do not have a dispatch channel listed specifically for Reading. The county sheriff's dispatch channels in the same county: Perry Co Sheriff 460.1750 MHz, FM, 723 DPL; Perry Co Sheriff dispatch 39.9200 MHz, FM, 82.5 PL.
Do the police use a trunked radio system in Reading?
Yes. The county-level systems that cover Reading are Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 4 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Reading?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Reading?
For Reading, start with the New Lexington site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 771.75625, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.