Skip to content

Noble County Fire and EMS Frequencies

Noble County in Ohio has 3 countywide conventional frequencies and 2 countywide talkgroups in our database. Use the list of 21 cities and communities below for local fire departments and EMS agencies.

About Noble County Fire and EMS Frequencies

Quick answer: Fire dispatch for Noble County: Fire and EMS 33.9000 MHz, FM, no tone. EMS dispatch for Noble County: Fire and EMS 154.0850 MHz, narrow FM, 173.8 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Noble County Fire talkgroup 37505 (hex 9281).

  • 3 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Noble County, start with the Noble C.I. (Caldwell) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 774.03125, 774.38125 MHz.

Data updated .

Noble County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSNoble County Fire dispatch (including Belle Valley, Caldwell, and Summerfield)33.9000FMKNFQ946

EMS Dispatch

EMS Dispatch frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSUnited Ambulance Dispatch154.0850
In 159.3000
173.8 PLFMNKNJU589

EMS Tactical

EMS Tactical frequencies for Noble County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire and EMSUnited Ambulance Operations155.1600173.8 PLFMNKNJU589

Noble County trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Noble County FireNoble County Fire – Dispatch375059281D
Noble County EMSNoble County EMS – Dispatch375049280D

Radio system sites in Noble County

Program the control channel first; your scanner finds the voice channels from it.

Noble C.I. (Caldwell) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 3 · Site 2 (hex 2) · NAC 341
Control 774.03125, 774.38125
Voice 769.93125, 772.63125, 854.6625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Noble County

Common questions

What frequency does the fire department use in Noble County?

Fire dispatch channels listed for Noble County: Fire and EMS 33.9000 MHz, FM, no tone.

What frequency does EMS or the ambulance service use in Noble County?

EMS dispatch channels listed for Noble County: Fire and EMS 154.0850 MHz, narrow FM, 173.8 PL.

Do fire departments and EMS use a trunked radio system in Noble County?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 2 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Noble County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Noble County?

For Noble County, start with the Noble C.I. (Caldwell) site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.03125, 774.38125 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Noble County fire and EMS frequencies encrypted?

None of the 3 conventional frequencies listed for Noble County are marked encrypted.

Are Noble County fire and EMS talkgroups encrypted?

None of the 2 talkgroups listed for Noble County are marked encrypted.