Skip to content

Knox County Fire and EMS Frequencies

Knox County in Ohio has 10 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 34 cities and communities below for local fire departments and EMS agencies.

About Knox County Fire and EMS Frequencies

Quick answer: Fire dispatch for Knox County: Fire/EMS Operations 154.3250 MHz, narrow FM, 162.2 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Knox County Fire talkgroup 27004 (hex 697c).

  • 10 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Knox County, start with the Centerburg site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 772.98125, 773.45625 MHz.

Data updated .

Knox County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsCounty Fire (dispatch)154.3250
In 153.8900
162.2 PLFMNWQWP786
Fire/EMS OperationsMount Vernon Fire159.0450
In 154.3850
77.0 PLFMNWPSG855

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsNorth fireground151.1600
In 159.1950
77.0 PLFMNWQBJ550
Fire/EMS OperationsWest fireground151.2500
In 155.1150
162.2 PLFMNWQGH371
Fire/EMS OperationsMt Vernon (city) fireground153.830077.0 PLFMWPQY945
Fire/EMS OperationsEast fireground154.2950
In 155.1150
77.0 PLFMNWQEU705
Fire/EMS OperationsCentral fireground159.2925
In 153.8000
77.0 PLFMNWPSG855

Fire Talk-around

Fire Talk-around frequencies for Knox County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Fire/EMS OperationsCounty Fire (car to car south)154.3250
In 153.8900
77.0 PLFMNWQWP786
Fire/EMS OperationsCounty Fire (car to car central)154.3250
In 153.8900
91.5 PLFMNWQWP786
Fire/EMS OperationsCounty Fire (car to car north)154.3250
In 153.8900
85.4 PLFMNWQWP786

Knox County trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Knox County FireKnox County Fire – Dispatch27004697cD
Knox County FireFire Operations270126984D
Knox County FireFire Operations270136985D
Knox County FireFire Operations270166988D
Knox County FireFire Operations27020698cD
Knox County EMSEMS Operations270086980D

Radio system sites in Knox County

Program the control channel first; your scanner finds the voice channels from it.

Centerburg · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 3 (hex 3) · NAC 342
Control 772.98125, 773.45625
Voice 769.40625, 771.78125, 772.08125, 772.70625, 852.0375, 858.6125
Mt Vernon · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 32 (hex 20) · NAC 34F
Control 772.20625, 773.58125
Voice 771.03125, 771.48125
Brinkhaven · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 33 (hex 21) · NAC 340
Control 772.75625, 774.90625
Voice 772.48125, 852.4875, 853.1875, 853.7875
Knox County (Gilchrist) · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 1 · Site 47 (hex 2F) · NAC 34C
Control 853.9, 856.0875
Voice 851.8875, 852.1625, 853.1625, 853.725
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Knox County

Common questions

What frequency does the fire department use in Knox County?

Fire dispatch channels listed for Knox County: Fire/EMS Operations 154.3250 MHz, narrow FM, 162.2 PL.

Do fire departments and EMS use a trunked radio system in Knox County?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Knox County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Knox County?

For Knox County, start with the Centerburg site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.98125, 773.45625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Knox County fire and EMS frequencies encrypted?

None of the 10 conventional frequencies listed for Knox County are marked encrypted.

Are Knox County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Knox County are marked encrypted.