About Clinton Police Frequencies
Quick answer: County-level dispatch that covers Clinton: Knox County Sheriff 159.3300 MHz, narrow FM, 107.2 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Knox County State Corrections talkgroup 52864 (hex ce80).
- 2 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry law-enforcement traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Clinton, start with the Mt Vernon site of Ohio MARCS-IP: Multi-Agency Radio Communications, about 2 miles away. Its control channels: 772.20625, 773.58125 MHz.
- 2 listed entries are marked encrypted. No scanner can decode encrypted audio.
Data updated .
Knox County channels that also cover Clinton
Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Sheriff | Knox County Sheriff – Dispatch | 159.3300 In 153.8450 | 107.2 PL | FMN | WQDM383 |
Talk-around & Car-to-Car
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Knox County Sheriff | Knox County Jail | 155.9250 In 153.9050 | FMN | WPXB945 |
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Knox County State Corrections | Adult Parole Authority – Huron Unit | 52864 | ce80 | D |
2 encrypted talkgroups (cannot be monitored)
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Knox County Sheriff | Knox County Sheriff – Dispatch | 27002 | 697a | D Encrypted |
| Knox County Sheriff | Knox County Sheriff – Tactical Channel | 27006 | 697e | D Encrypted |
Nearest trunked radio sites
Distances are measured from the center of Clinton.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Common questions
What frequency do the police use in Clinton?
We do not have a dispatch channel listed specifically for Clinton. The county sheriff's dispatch channels in the same county: Knox County Sheriff 159.3300 MHz, narrow FM, 107.2 PL.
Do the police use a trunked radio system in Clinton?
Yes. The county-level systems that cover Clinton are Law-enforcement talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 3 talkgroups. A trunking scanner is required.
What scanner do I need to listen to police in Clinton?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Clinton?
For Clinton, start with the Mt Vernon site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 772.20625, 773.58125 MHz. Program a control channel first; the scanner finds the voice channels from it.