About Champaign County Fire and EMS Frequencies
Quick answer: Fire dispatch for Champaign County: Adams Twp Fire Dispatch 151.3400 MHz, narrow FM, 123.0 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Champaign County Fire talkgroup 10283 (hex 282b).
- 7 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
- Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 9 talkgroups. A trunking scanner is required, and it must support the system type shown.
- To follow a trunked system, program a control channel first. For Champaign County, start with the Urbana site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 773.90625, 774.80625 MHz.
Data updated .
Champaign County conventional frequencies
Fire Dispatch
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Adams Twp Fire Dispatch | Adams Twp Fire Dispatch | 151.3400 In 158.8650 | 123.0 PL | FMN | KNAX701 |
Fire Ground / Tactical
| Agency | Description | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|---|
| Champaign County Fire | Countywide simplex fireground | 153.8900 | CSQ | FMN | VARIES |
| Champaign County Fire | North Lewisburg fireground | 155.1600 | 127.3 PL | FMN | WQGE387 |
| Mechanicsburg Fireground Fire | Mechanicsburg Fireground | 153.8900 | FMN | KQH258 | |
| Urbana Fireground 1 | Urbana Fireground | 154.2650 | FMN | KCW649 | |
| Urbana Fireground 2 | Urbana Fireground | 154.2950 | FMN | KCW649 | |
| Urbana Fireground Fire | Urbana Fireground | 153.8300 | FMN | KCW649 |
Champaign County trunked talkgroups
Ohio MARCS-IP: Multi-Agency Radio Communications
| Agency | Description | Talkgroup | Hex | Mode |
|---|---|---|---|---|
| Champaign County Fire | County Fire/EMS Paging (all agencies) | 10283 | 282b | D |
| Champaign County Fire | County Fire Departments Operations | 10286 | 282e | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10288 | 2830 | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10289 | 2831 | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10294 | 2836 | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10296 | 2838 | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10297 | 2839 | D |
| Champaign County Fire | Champaign County Fire – Fire Ground | 10299 | 283b | D |
| Champaign County Hospital | Mercy Health Urbana Hospital Emergency Room | 10100 | 2774 | D |
Radio system sites in Champaign County
Program the control channel first; your scanner finds the voice channels from it.
What do these numbers mean?
- Control channel
- The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
- Voice
- The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
- Site
- One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
- RFSS (Radio Frequency Sub-System)
- A group of sites run by the same controller. Large Project 25 systems can have several.
- NAC (Network Access Code)
- A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
- Talkgroup
- A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.
Cities & communities in Champaign County
Common questions
What frequency does the fire department use in Champaign County?
Fire dispatch channels listed for Champaign County: Adams Twp Fire Dispatch 151.3400 MHz, narrow FM, 123.0 PL.
Do fire departments and EMS use a trunked radio system in Champaign County?
Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 9 talkgroups. A trunking scanner is required.
What scanner do I need to listen to fire and EMS in Champaign County?
The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.
What are the control channels for trunked radio in Champaign County?
For Champaign County, start with the Urbana site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 773.90625, 774.80625 MHz. Program a control channel first; the scanner finds the voice channels from it.
Are Champaign County fire and EMS frequencies encrypted?
None of the 7 conventional frequencies listed for Champaign County are marked encrypted.
Are Champaign County fire and EMS talkgroups encrypted?
None of the 9 talkgroups listed for Champaign County are marked encrypted.