Skip to content

Ashland County Fire and EMS Frequencies

Ashland County in Ohio has 4 countywide conventional frequencies and 6 countywide talkgroups in our database. Use the list of 25 cities and communities below for local fire departments and EMS agencies.

About Ashland County Fire and EMS Frequencies

Quick answer: Fire dispatch for Ashland County: Ashland City Fire Dispatch 154.1450 MHz, narrow FM, 141.3 PL; Ashland County Fire 151.2200 MHz, narrow FM, 123.0 PL. Trunked: Ohio MARCS-IP: Multi-Agency Radio Communications, for example Ashland County Fire talkgroup 6004 (hex 1774).

  • 4 conventional channels are analog FM, so any scanner can receive them. Enter the frequency and set the tone shown in the table.
  • Trunked radio systems that carry fire and EMS traffic here: Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required, and it must support the system type shown.
  • To follow a trunked system, program a control channel first. For Ashland County, start with the New London site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels: 774.45625, 774.70625 MHz.

Data updated .

Ashland County conventional frequencies

Fire Dispatch

Fire Dispatch frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
Ashland City Fire DispatchAshland City Fire Dispatch154.1450
In 151.2650
141.3 PLFMNKQI229
Ashland County FireAshland County Fire – Dispatch151.2200
In 154.0700
123.0 PLFMNWQEN323

Fire Ground / Tactical

Fire Ground / Tactical frequencies for Ashland County
AgencyDescriptionFrequency (MHz)ToneModeFCC
North Fireground FireNorth Fireground150.790094.8 PLFMNKNNT805
South Fireground FireSouth Fireground150.100094.8 PLFMNKNNT805

Ashland County trunked talkgroups

Ohio MARCS-IP: Multi-Agency Radio Communications

Ohio MARCS-IP: Multi-Agency Radio Communications talkgroups
AgencyDescriptionTalkgroupHexMode
Ashland County FireFire Paging60041774D
Ashland County FireAshland County Fire – Dispatch60211785D
Ashland County FireFire Operations60241788D
Ashland County FireAshland County Fire – Tactical Channel60331791D
Ashland County FireAshland County Fire – Tactical Channel60361794D
Ashland County HospitalSamaritan Regional Health Systems59736e958D

Radio system sites in Ashland County

Program the control channel first; your scanner finds the voice channels from it.

New London · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 53 (hex 35) · NAC 344
Control 774.45625, 774.70625
Voice 769.78125, 773.70625, 773.98125
Ashland · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 56 (hex 38) · NAC 347
Control 773.43125, 774.80625
Voice 769.15625, 772.93125, 852.975, 854.6375
Loudonville · Ohio MARCS-IP: Multi-Agency Radio Communications
RFSS 2 · Site 57 (hex 39) · NAC 348
Control 771.58125, 772.05625
Voice 769.45625, 770.55625, 852.4125, 852.5625
What do these numbers mean?
Control channel
The frequency your scanner listens to first. It tells the scanner where each voice call is happening, so program it before anything else.
Voice
The other frequencies the site uses for calls. A trunking scanner follows them automatically once it has the control channel.
Site
One tower location of the system. Scanners show the number in decimal or hex, so both are listed.
RFSS (Radio Frequency Sub-System)
A group of sites run by the same controller. Large Project 25 systems can have several.
NAC (Network Access Code)
A hex code the site transmits. Your scanner can use it to ignore other systems on the same frequency.
Talkgroup
A virtual channel on a trunked system, such as one agency’s dispatch. Programming uses the decimal or hex number, depending on your scanner.

Cities & communities in Ashland County

Common questions

What frequency does the fire department use in Ashland County?

Fire dispatch channels listed for Ashland County: Ashland City Fire Dispatch 154.1450 MHz, narrow FM, 141.3 PL; Ashland County Fire 151.2200 MHz, narrow FM, 123.0 PL.

Do fire departments and EMS use a trunked radio system in Ashland County?

Yes. Fire and EMS talkgroups are listed for Ohio MARCS-IP: Multi-Agency Radio Communications: 6 talkgroups. A trunking scanner is required.

What scanner do I need to listen to fire and EMS in Ashland County?

The analog conventional channels can be heard on any scanner; a trunking scanner is needed for the trunked talkgroups.

What are the control channels for trunked radio in Ashland County?

For Ashland County, start with the New London site of Ohio MARCS-IP: Multi-Agency Radio Communications. Its control channels are 774.45625, 774.70625 MHz. Program a control channel first; the scanner finds the voice channels from it.

Are Ashland County fire and EMS frequencies encrypted?

None of the 4 conventional frequencies listed for Ashland County are marked encrypted.

Are Ashland County fire and EMS talkgroups encrypted?

None of the 6 talkgroups listed for Ashland County are marked encrypted.